APRS Track Direct

☰

reset

SP2SGK-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SP2SGK-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	TX*	RX*	Digi*
1769919248	953 Count	891 Count	478 Count
1769918345	951 Count	889 Count	477 Count
1769917442	949 Count	887 Count	476 Count
1769916539	947 Count	885 Count	475 Count
1769915636	945 Count	883 Count	474 Count
1769914733	943 Count	881 Count	473 Count
1769913830	941 Count	879 Count	472 Count
1769912927	939 Count	877 Count	471 Count
1769912024	937 Count	875 Count	470 Count
1769911121	935 Count	873 Count	469 Count
1769910218	933 Count	871 Count	468 Count
1769909315	931 Count	869 Count	467 Count
1769908412	929 Count	867 Count	466 Count
1769907509	927 Count	865 Count	465 Count
1769906606	925 Count	863 Count	464 Count
1769905702	923 Count	861 Count	463 Count
1769904799	921 Count	859 Count	462 Count
1769896744	903 Count	842 Count	453 Count
1769895841	901 Count	840 Count	452 Count
1769891326	891 Count	832 Count	447 Count
1769890424	889 Count	831 Count	446 Count
1769885908	879 Count	821 Count	441 Count
1769885005	877 Count	819 Count	440 Count
1769884102	875 Count	817 Count	439 Count
1769883199	873 Count	815 Count	438 Count

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)

Select date and time to show map data for (enter time for your locale time zone). The regular time length select box can still be used to select how old data that should be shown (relative to selected date and time).

*Note that the heatmap will still based on data from the latest hour (not the selected date and time).

Date and time:

Maintained by RADIOCULT Community, based on APRS Track Direct