APRS Track Direct

☰

reset

SP2HCA-10 Telemetry

This is the latest recevied telemetry packets stored in our database for station/object SP2HCA-10. If no packets are shown the sender has not sent any telemetry packets the latest 10 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 >>

Time	TX*	RX*	Digi*
1769833475	6 Count	93 Count	4 Count
1769832271	3 Count	62 Count	2 Count
1769831071	0 Count	32 Count	0 Count
1769829870	97 Count	1002 Count	60 Count
1769828669	93 Count	969 Count	57 Count
1769827468	90 Count	932 Count	55 Count
1769826268	88 Count	901 Count	54 Count
1769825067	86 Count	868 Count	53 Count
1769823866	84 Count	828 Count	52 Count
1769822666	82 Count	804 Count	51 Count
1769821465	79 Count	777 Count	49 Count
1769820264	74 Count	748 Count	45 Count
1769819063	73 Count	719 Count	45 Count
1769808269	46 Count	473 Count	31 Count
1769807068	44 Count	448 Count	30 Count
1769805867	41 Count	414 Count	28 Count
1769804667	39 Count	382 Count	27 Count
1769803466	36 Count	353 Count	25 Count
1769802265	33 Count	321 Count	23 Count
1769801064	32 Count	271 Count	23 Count
1769796262	21 Count	113 Count	16 Count
1769795076	11 Count	54 Count	11 Count
1769793875	129 Count	1005 Count	98 Count
1769792674	126 Count	977 Count	96 Count
1769791473	104 Count	915 Count	75 Count

*Used Equation Coefficients:

TX: 0, 1, 0

RX: 0, 1, 0

Digi: 0, 1, 0

V_Bat: 0, 0.01, 0

V_Ext: 0, 0.02, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)

Select date and time to show map data for (enter time for your locale time zone). The regular time length select box can still be used to select how old data that should be shown (relative to selected date and time).

*Note that the heatmap will still based on data from the latest hour (not the selected date and time).

Date and time:

Maintained by RADIOCULT Community, based on APRS Track Direct