This is the latest recevied telemetry packets stored in our database for station/object IW1AXR-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Battery* | Temp* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1717354320 | 12.8 Volt | 19 GrdC | 0 | 0 | 0 |
1717353717 | 12.8 Volt | 19 GrdC | 0 | 0 | 0 |
1717353114 | 12.8 Volt | 19 GrdC | 0 | 0 | 0 |
1717352510 | 12.8 Volt | 19 GrdC | 0 | 0 | 0 |
1717351907 | 12.8 Volt | 19 GrdC | 0 | 0 | 0 |
1717351303 | 12.8 Volt | 19 GrdC | 0 | 0 | 0 |
1717350700 | 12.8 Volt | 19 GrdC | 0 | 0 | 0 |
1717350096 | 12.8 Volt | 19 GrdC | 0 | 0 | 0 |
1717349493 | 12.8 Volt | 19 GrdC | 0 | 0 | 0 |
1717348890 | 12.8 Volt | 19 GrdC | 0 | 0 | 0 |
1717348286 | 12.8 Volt | 18.75 GrdC | 0 | 0 | 0 |
1717347683 | 12.8 Volt | 19 GrdC | 0 | 0 | 0 |
1717347079 | 12.8 Volt | 18.75 GrdC | 0 | 0 | 0 |
1717346476 | 12.9 Volt | 19 GrdC | 0 | 0 | 0 |
1717345872 | 12.9 Volt | 18.75 GrdC | 0 | 0 | 0 |
1717345269 | 12.9 Volt | 18.75 GrdC | 0 | 0 | 0 |
1717344666 | 13 Volt | 18.75 GrdC | 0 | 0 | 0 |
1717344062 | 13 Volt | 19 GrdC | 0 | 0 | 0 |
1717343459 | 13.1 Volt | 19 GrdC | 0 | 0 | 0 |
1717342855 | 13.2 Volt | 18.75 GrdC | 0 | 0 | 0 |
1717341649 | 13.3 Volt | 18.75 GrdC | 0 | 0 | 0 |
1717341045 | 13.4 Volt | 18.75 GrdC | 0 | 0 | 0 |
1717340443 | 13.4 Volt | 18.75 GrdC | 0 | 0 | 0 |
1717339838 | 13.2 Volt | 18.75 GrdC | 0 | 0 | 0 |
1717339235 | 13.2 Volt | 18.75 GrdC | 0 | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 0.1, 0
Temp: 0, 0.25, -20.5
Value3: 0, 0, 0
Value4: 0, 0, 0
Value5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)