This is the latest recevied telemetry packets stored in our database for station/object DK1TN-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Temp* | Humi* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1720279551 | 23.1 deg C | 40 % | 0 | 0 | 0 |
1720278651 | 23.3 deg C | 40.1 % | 0 | 0 | 0 |
1720277751 | 23.3 deg C | 40.4 % | 0 | 0 | 0 |
1720276851 | 23.3 deg C | 40.4 % | 0 | 0 | 0 |
1720275951 | 23.3 deg C | 40.6 % | 0 | 0 | 0 |
1720275050 | 23.2 deg C | 40.7 % | 0 | 0 | 0 |
1720274150 | 23.2 deg C | 40.6 % | 0 | 0 | 0 |
1720273250 | 23.2 deg C | 40.6 % | 0 | 0 | 0 |
1720272350 | 23.2 deg C | 40.3 % | 0 | 0 | 0 |
1720271450 | 23.1 deg C | 40.2 % | 0 | 0 | 0 |
1720271116 | 23.1 deg C | 40.6 % | 0 | 0 | 0 |
1720270215 | 23.1 deg C | 41 % | 0 | 0 | 0 |
1720269315 | 23 deg C | 41.2 % | 0 | 0 | 0 |
1720268415 | 23 deg C | 40.7 % | 0 | 0 | 0 |
1720267515 | 22.9 deg C | 40.6 % | 0 | 0 | 0 |
1720266615 | 22.9 deg C | 39.7 % | 0 | 0 | 0 |
1720265715 | 22.9 deg C | 40 % | 0 | 0 | 0 |
1720264815 | 22.8 deg C | 40.7 % | 0 | 0 | 0 |
1720263915 | 22.7 deg C | 39.9 % | 0 | 0 | 0 |
1720263015 | 22.6 deg C | 40 % | 0 | 0 | 0 |
1720262115 | 22.4 deg C | 40.2 % | 0 | 0 | 0 |
1720261215 | 22.1 deg C | 40.2 % | 0 | 0 | 0 |
1720260315 | 22.3 deg C | 39.7 % | 0 | 0 | 0 |
1720259415 | 22.1 deg C | 42.4 % | 0 | 0 | 0 |
1720259082 | 22 deg C | 42.5 % | 0 | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)