This is the latest recevied telemetry packets stored in our database for station/object DK1TN-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Temp* | Humi* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1720235676 | 21 deg C | 40.2 % | 0 | 0 | 0 |
1720234775 | 21 deg C | 39.9 % | 0 | 0 | 0 |
1720233875 | 21 deg C | 39.6 % | 0 | 0 | 0 |
1720232975 | 21.1 deg C | 39.4 % | 0 | 0 | 0 |
1720232075 | 21.2 deg C | 39.1 % | 0 | 0 | 0 |
1720231175 | 21.4 deg C | 38.7 % | 0 | 0 | 0 |
1720230275 | 21.5 deg C | 38.4 % | 0 | 0 | 0 |
1720229375 | 21.7 deg C | 38 % | 0 | 0 | 0 |
1720228460 | 21.9 deg C | 37.4 % | 0 | 0 | 0 |
1720227560 | 22 deg C | 37 % | 0 | 0 | 0 |
1720226660 | 22.2 deg C | 36.3 % | 0 | 0 | 0 |
1720225760 | 22.4 deg C | 35.8 % | 0 | 0 | 0 |
1720225393 | 22.3 deg C | 35.9 % | 0 | 0 | 0 |
1720224493 | 22.3 deg C | 35.6 % | 0 | 0 | 0 |
1720223593 | 22.1 deg C | 35.8 % | 0 | 0 | 0 |
1720222693 | 21.8 deg C | 36.4 % | 0 | 0 | 0 |
1720221793 | 21.3 deg C | 37 % | 0 | 0 | 0 |
1720220892 | 20.8 deg C | 37 % | 0 | 0 | 0 |
1720219992 | 21 deg C | 37.3 % | 0 | 0 | 0 |
1720219092 | 21 deg C | 37.6 % | 0 | 0 | 0 |
1720218760 | 20.9 deg C | 37.9 % | 0 | 0 | 0 |
1720217860 | 20.8 deg C | 38.3 % | 0 | 0 | 0 |
1720216959 | 20.5 deg C | 39 % | 0 | 0 | 0 |
1720216059 | 20.2 deg C | 40.2 % | 0 | 0 | 0 |
1720215159 | 19.9 deg C | 40.8 % | 0 | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)