This is the latest recevied telemetry packets stored in our database for station/object WA6ODP-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Value1* | Value2* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1719819601 | 336 | 86.8 | 44 | 81.3 | 0 |
1719818702 | 335 | 86.4 | 42.9 | 80.8 | 0 |
1719817801 | 336 | 85.9 | 42.9 | 80.5 | 0 |
1719816901 | 336 | 85.4 | 43.5 | 80 | 0 |
1719816001 | 335 | 84.9 | 43.5 | 79.6 | 0 |
1719815102 | 336 | 84.1 | 41.9 | 78.9 | 0 |
1719814201 | 336 | 83.4 | 41.9 | 78 | 0 |
1719813301 | 336 | 82.6 | 40.8 | 77.1 | 0 |
1719812401 | 338 | 82.1 | 40.8 | 76.3 | 0 |
1719811505 | 337 | 82 | 40.8 | 76.1 | 0 |
1719810601 | 337 | 82.2 | 40.8 | 76.3 | 0 |
1719809701 | 337 | 82.6 | 40.8 | 76.7 | 0 |
1719808801 | 338 | 83 | 41.9 | 77 | 0 |
1719807903 | 337 | 83.6 | 41.9 | 77.6 | 0 |
1719807001 | 339 | 84.3 | 42.9 | 78.2 | 0 |
1719806102 | 338 | 85.6 | 42.9 | 79.2 | 0 |
1719805201 | 337 | 87.1 | 44.5 | 80.4 | 0 |
1719804303 | 339 | 88.9 | 45.1 | 82.1 | 0 |
1719803401 | 337 | 91.2 | 46.2 | 84.2 | 0 |
1719802503 | 336 | 93.8 | 47.2 | 86.8 | 0 |
1719801601 | 337 | 95.6 | 48.3 | 89.2 | 0 |
1719800703 | 336 | 96.8 | 48.3 | 90.3 | 0 |
1719799802 | 334 | 97.9 | 49.4 | 91.4 | 0 |
1719798902 | 334 | 98.9 | 49.9 | 92.4 | 0 |
1719798002 | 333 | 99.8 | 49.9 | 93.3 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 0.1, 0
Value3: 0, 0.1, 0
Value4: 0, 0.1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)