This is the latest recevied telemetry packets stored in our database for station/object WA6ODP-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Value1* | Value2* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1719777302 | 334 | 104.9 | 54.2 | 98 | 0 |
1719776401 | 335 | 104 | 53.2 | 97.2 | 0 |
1719775502 | 334 | 103.4 | 53.2 | 96.8 | 0 |
1719774601 | 335 | 102.4 | 53.2 | 96 | 0 |
1719773702 | 335 | 101.3 | 52.1 | 94.8 | 0 |
1719772801 | 335 | 100.5 | 51.5 | 94.2 | 0 |
1719771903 | 335 | 100.2 | 51.5 | 93.9 | 0 |
1719770102 | 334 | 100.2 | 50.5 | 93.6 | 0 |
1719769201 | 336 | 99.7 | 50.5 | 93.3 | 0 |
1719768302 | 336 | 99.3 | 51 | 93.2 | 0 |
1719767401 | 337 | 98.5 | 50.5 | 92.4 | 0 |
1719766503 | 337 | 97.7 | 49.4 | 91.5 | 0 |
1719765601 | 336 | 96.8 | 49.4 | 90.6 | 0 |
1719764701 | 336 | 95.6 | 48.3 | 89.5 | 0 |
1719763802 | 335 | 94.6 | 48.3 | 88.5 | 0 |
1719762902 | 334 | 93.4 | 47.8 | 87.5 | 0 |
1719762001 | 334 | 91.8 | 46.7 | 86.2 | 0 |
1719761102 | 334 | 90.3 | 45.6 | 84.8 | 0 |
1719760201 | 335 | 88.5 | 45.1 | 83.2 | 0 |
1719759303 | 335 | 86.4 | 43.5 | 81.3 | 0 |
1719758402 | 334 | 84.6 | 42.9 | 79.4 | 0 |
1719757502 | 334 | 83.3 | 41.3 | 77.9 | 0 |
1719756602 | 335 | 82.1 | 41.9 | 76.7 | 0 |
1719755702 | 335 | 81.2 | 39.7 | 75.6 | 0 |
1719754802 | 335 | 80.3 | 39.7 | 74.9 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 0.1, 0
Value3: 0, 0.1, 0
Value4: 0, 0.1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)