This is the latest recevied telemetry packets stored in our database for station/object PP5CFL-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | RSSI* | VBAT* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1718317517 | -51 dbm | 3.05 V | 0 | 0 | 0 |
1718317213 | -51 dbm | 3.05 V | 0 | 0 | 0 |
1718316913 | -52 dbm | 3.05 V | 0 | 0 | 0 |
1718316613 | -50 dbm | 3.05 V | 0 | 0 | 0 |
1718316313 | -50 dbm | 3.05 V | 0 | 0 | 0 |
1718316013 | -51 dbm | 3.05 V | 0 | 0 | 0 |
1718315713 | -50 dbm | 3.05 V | 0 | 0 | 0 |
1718315413 | -51 dbm | 3.05 V | 0 | 0 | 0 |
1718315113 | -51 dbm | 3.05 V | 0 | 0 | 0 |
1718314813 | -50 dbm | 3.05 V | 0 | 0 | 0 |
1718314513 | -50 dbm | 3.05 V | 0 | 0 | 0 |
1718314213 | -50 dbm | 3.05 V | 0 | 0 | 0 |
1718313913 | -51 dbm | 3.05 V | 0 | 0 | 0 |
1718313612 | -50 dbm | 3.05 V | 0 | 0 | 0 |
1718313313 | -51 dbm | 3.05 V | 0 | 0 | 0 |
1718313013 | -50 dbm | 3.05 V | 0 | 0 | 0 |
1718312713 | -50 dbm | 3.05 V | 0 | 0 | 0 |
1718312413 | -50 dbm | 3.04 V | 0 | 0 | 0 |
1718312113 | -48 dbm | 3.06 V | 0 | 0 | 0 |
1718311813 | -48 dbm | 3.05 V | 0 | 0 | 0 |
1718311513 | -48 dbm | 3.05 V | 0 | 0 | 0 |
1718311213 | -50 dbm | 3.05 V | 0 | 0 | 0 |
1718310913 | -49 dbm | 3.05 V | 0 | 0 | 0 |
1718310613 | -47 dbm | 3.05 V | 0 | 0 | 0 |
1718310312 | -46 dbm | 3.06 V | 0 | 0 | 0 |
*Used Equation Coefficients:
RSSI: 0, -1, 0
VBAT: 0, 0.01, 0
Value3: 0, 0, 0
Value4: 0, 0, 0
Value5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)