This is the latest recevied telemetry packets stored in our database for station/object HB9HFD-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | RXheure* | RX10min* | Volts* | RX 1h* | RXall* |
---|---|---|---|---|---|
1719334905 | 0 | 0 | 0 | 0 | 0 |
1719334004 | 0 | 0 | 0 | 0 | 0 |
1719333103 | 0 | 0 | 0 | 0 | 0 |
1719332202 | 0 | 0 | 0 | 0 | 0 |
1719331303 | 0 | 0 | 0 | 0 | 0 |
1719330401 | 0 | 0 | 0 | 0 | 0 |
1719329500 | 0 | 0 | 0 | 0 | 0 |
1719328599 | 0 | 0 | 0 | 0 | 0 |
1719327698 | 0 | 0 | 0 | 0 | 0 |
1719326797 | 0 | 0 | 0 | 0 | 0 |
1719325896 | 0 | 0 | 0 | 0 | 0 |
1719324996 | 0 | 0 | 0 | 0 | 0 |
1719324095 | 0 | 0 | 0 | 0 | 0 |
1719323194 | 0 | 0 | 0 | 0 | 0 |
1719322293 | 0 | 0 | 0 | 0 | 0 |
1719321392 | 0 | 0 | 0 | 0 | 0 |
1719320492 | 0 | 0 | 0 | 0 | 0 |
1719319591 | 0 | 0 | 0 | 0 | 0 |
1719318690 | 0 | 0 | 0 | 0 | 0 |
1719317789 | 0 | 0 | 0 | 0 | 0 |
1719316888 | 0 | 0 | 0 | 0 | 0 |
1719315988 | 0 | 0 | 0 | 0 | 0 |
1719315087 | 0 | 0 | 0 | 0 | 0 |
1719314186 | 0 | 0 | 0 | 0 | 0 |
1719313285 | 0 | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
RXheure: 0, 0, 0
RX10min: 0, 0, 0
Volts: 0, 0, 0
RX 1h: 0, 0, 0
RXall: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)