This is the latest recevied telemetry packets stored in our database for station/object HB9HFD-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | RXheure* | RX10min* | Volts* | RX 1h* | RXall* |
---|---|---|---|---|---|
1718479142 | 0 | 0 | 0 | 0 | 0 |
1718478241 | 0 | 0 | 0 | 0 | 0 |
1718477341 | 0 | 0 | 0 | 0 | 0 |
1718476440 | 0 | 0 | 0 | 0 | 0 |
1718475539 | 0 | 0 | 0 | 0 | 0 |
1718474638 | 0 | 0 | 0 | 0 | 0 |
1718473737 | 0 | 0 | 0 | 0 | 0 |
1718472837 | 0 | 0 | 0 | 0 | 0 |
1718471936 | 0 | 0 | 0 | 0 | 0 |
1718471035 | 0 | 0 | 0 | 0 | 0 |
1718470134 | 0 | 0 | 0 | 0 | 0 |
1718469233 | 0 | 0 | 0 | 0 | 0 |
1718468332 | 0 | 0 | 0 | 0 | 0 |
1718467432 | 0 | 0 | 0 | 0 | 0 |
1718466531 | 0 | 0 | 0 | 0 | 0 |
1718465630 | 0 | 0 | 0 | 0 | 0 |
1718464729 | 0 | 0 | 0 | 0 | 0 |
1718463828 | 0 | 0 | 0 | 0 | 0 |
1718462928 | 0 | 0 | 0 | 0 | 0 |
1718462027 | 0 | 0 | 0 | 0 | 0 |
1718461126 | 0 | 0 | 0 | 0 | 0 |
1718460225 | 0 | 0 | 0 | 0 | 0 |
1718459325 | 0 | 0 | 0 | 0 | 0 |
1718458424 | 0 | 0 | 0 | 0 | 0 |
1718457523 | 0 | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
RXheure: 0, 0, 0
RX10min: 0, 0, 0
Volts: 0, 0, 0
RX 1h: 0, 0, 0
RXall: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)