This is the latest recevied telemetry packets stored in our database for station/object ALDER. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Value1* | Value2* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1717313606 | 204 | 37 | 28 | 22 | 118 |
1717313305 | 204 | 37 | 28 | 22 | 118 |
1717313004 | 204 | 37 | 28 | 22 | 118 |
1717312705 | 204 | 37 | 27 | 22 | 118 |
1717312405 | 204 | 37 | 28 | 22 | 118 |
1717312104 | 204 | 37 | 28 | 22 | 118 |
1717311804 | 204 | 37 | 28 | 22 | 118 |
1717311505 | 204 | 36 | 27 | 22 | 118 |
1717311205 | 204 | 37 | 28 | 22 | 118 |
1717310904 | 204 | 37 | 27 | 22 | 118 |
1717310604 | 204 | 37 | 28 | 22 | 118 |
1717310305 | 204 | 37 | 27 | 22 | 118 |
1717310007 | 204 | 36 | 27 | 22 | 118 |
1717309705 | 204 | 37 | 27 | 22 | 118 |
1717309105 | 204 | 37 | 27 | 22 | 118 |
1717308809 | 204 | 37 | 28 | 22 | 118 |
1717308504 | 204 | 37 | 28 | 22 | 118 |
1717308206 | 204 | 37 | 28 | 22 | 118 |
1717307905 | 204 | 37 | 27 | 22 | 118 |
1717307605 | 204 | 37 | 28 | 22 | 118 |
1717307007 | 204 | 36 | 27 | 22 | 118 |
1717306706 | 204 | 36 | 27 | 22 | 118 |
1717306411 | 204 | 37 | 28 | 22 | 118 |
1717306106 | 204 | 36 | 27 | 22 | 118 |
1717305805 | 204 | 37 | 28 | 22 | 118 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)