This is the latest recevied telemetry packets stored in our database for station/object YO2CK-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Temp_exterioara* | Value2* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1719824814 | 28.5 C | 0 | 0 | 0 | 0 |
1719824214 | 27.6 C | 0 | 0 | 0 | 0 |
1719823614 | 27.4 C | 0 | 0 | 0 | 0 |
1719823014 | 27.2 C | 0 | 0 | 0 | 0 |
1719822414 | 27 C | 0 | 0 | 0 | 0 |
1719821814 | 26.4 C | 0 | 0 | 0 | 0 |
1719821214 | 26.1 C | 0 | 0 | 0 | 0 |
1719820614 | 26.1 C | 0 | 0 | 0 | 0 |
1719820015 | 25.9 C | 0 | 0 | 0 | 0 |
1719819414 | 25.7 C | 0 | 0 | 0 | 0 |
1719818814 | 25.4 C | 0 | 0 | 0 | 0 |
1719818214 | 25 C | 0 | 0 | 0 | 0 |
1719817614 | 24.7 C | 0 | 0 | 0 | 0 |
1719817014 | 24.4 C | 0 | 0 | 0 | 0 |
1719816415 | 23.9 C | 0 | 0 | 0 | 0 |
1719815814 | 23.8 C | 0 | 0 | 0 | 0 |
1719815214 | 23.2 C | 0 | 0 | 0 | 0 |
1719814614 | 21.8 C | 0 | 0 | 0 | 0 |
1719814014 | 21.6 C | 0 | 0 | 0 | 0 |
1719813414 | 21.1 C | 0 | 0 | 0 | 0 |
1719812814 | 20.5 C | 0 | 0 | 0 | 0 |
1719812214 | 20.4 C | 0 | 0 | 0 | 0 |
1719811614 | 20.1 C | 0 | 0 | 0 | 0 |
1719811014 | 19.7 C | 0 | 0 | 0 | 0 |
1719810415 | 19.4 C | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Temp_exterioara: 0, 1, -100
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)