This is the latest recevied telemetry packets stored in our database for station/object YO2CK-11. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Temp_exterioara* | Value2* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1719932814 | 18.6 C | 0 | 0 | 0 | 0 |
1719932214 | 19 C | 0 | 0 | 0 | 0 |
1719931615 | 19.2 C | 0 | 0 | 0 | 0 |
1719931014 | 19.2 C | 0 | 0 | 0 | 0 |
1719930414 | 19.4 C | 0 | 0 | 0 | 0 |
1719929814 | 19.6 C | 0 | 0 | 0 | 0 |
1719929214 | 19.8 C | 0 | 0 | 0 | 0 |
1719928614 | 20.1 C | 0 | 0 | 0 | 0 |
1719928014 | 20.2 C | 0 | 0 | 0 | 0 |
1719927414 | 20.4 C | 0 | 0 | 0 | 0 |
1719926814 | 20.3 C | 0 | 0 | 0 | 0 |
1719926214 | 20.9 C | 0 | 0 | 0 | 0 |
1719925614 | 21.9 C | 0 | 0 | 0 | 0 |
1719925014 | 21.9 C | 0 | 0 | 0 | 0 |
1719924414 | 21.9 C | 0 | 0 | 0 | 0 |
1719923815 | 22.2 C | 0 | 0 | 0 | 0 |
1719923214 | 22 C | 0 | 0 | 0 | 0 |
1719922614 | 21.6 C | 0 | 0 | 0 | 0 |
1719922015 | 20.9 C | 0 | 0 | 0 | 0 |
1719921414 | 21.1 C | 0 | 0 | 0 | 0 |
1719920814 | 20.8 C | 0 | 0 | 0 | 0 |
1719920214 | 20.4 C | 0 | 0 | 0 | 0 |
1719919614 | 19.8 C | 0 | 0 | 0 | 0 |
1719919014 | 19.8 C | 0 | 0 | 0 | 0 |
1719918415 | 19.8 C | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
Temp_exterioara: 0, 1, -100
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)