This is the latest recevied telemetry packets stored in our database for station/object TB4DSC-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Vin* | Temp* | Decd %* | Value4* | Value5* |
---|---|---|---|---|---|
1719231998 | 171 Volt | 189 C | 45 Pkt | 0 | 0 |
1719231694 | 171 Volt | 190 C | 44 Pkt | 0 | 0 |
1719230796 | 172 Volt | 190 C | 39 Pkt | 0 | 0 |
1719230793 | 172 Volt | 190 C | 39 Pkt | 0 | 0 |
1719229892 | 171 Volt | 190 C | 38 Pkt | 0 | 0 |
1719229597 | 172 Volt | 190 C | 37 Pkt | 0 | 0 |
1719228991 | 171 Volt | 190 C | 38 Pkt | 0 | 0 |
1719228091 | 172 Volt | 189 C | 39 Pkt | 0 | 0 |
1719227193 | 172 Volt | 189 C | 43 Pkt | 0 | 0 |
1719227190 | 172 Volt | 189 C | 43 Pkt | 0 | 0 |
1719226289 | 172 Volt | 189 C | 45 Pkt | 0 | 0 |
1719225995 | 172 Volt | 189 C | 45 Pkt | 0 | 0 |
1719225388 | 171 Volt | 189 C | 51 Pkt | 0 | 0 |
1719224935 | 171 Volt | 189 C | 57 Pkt | 0 | 0 |
1719224487 | 171 Volt | 189 C | 63 Pkt | 0 | 0 |
1719223589 | 172 Volt | 189 C | 67 Pkt | 0 | 0 |
1719223586 | 172 Volt | 189 C | 67 Pkt | 0 | 0 |
1719222685 | 171 Volt | 189 C | 69 Pkt | 0 | 0 |
1719222388 | 171 Volt | 189 C | 69 Pkt | 0 | 0 |
1719221784 | 172 Volt | 189 C | 69 Pkt | 0 | 0 |
1719220883 | 171 Volt | 189 C | 71 Pkt | 0 | 0 |
1719219988 | 171 Volt | 189 C | 72 Pkt | 0 | 0 |
1719219983 | 171 Volt | 189 C | 72 Pkt | 0 | 0 |
1719219082 | 171 Volt | 189 C | 71 Pkt | 0 | 0 |
1719218785 | 172 Volt | 189 C | 69 Pkt | 0 | 0 |
*Used Equation Coefficients:
Vin: 0, 1, 0
Temp: 0, 1, 0
Decd %: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)