This is the latest recevied telemetry packets stored in our database for station/object CE3SUR-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Sate* | Temp* | Volt* | Alt* | A5* |
---|---|---|---|---|---|
1719835777 | 4 | 11.4 C | 4.24 V | 470 M | 0 |
1719834362 | 5 | 11.2 C | 4.23 V | 480 M | 0 |
1719833077 | 4 | 11.4 C | 4.24 V | 480 M | 0 |
1719831948 | 3 | 11.6 C | 4.23 V | 600 M | 0 |
1719829810 | 3 | 11.9 C | 4.24 V | 480 M | 0 |
1719827501 | 4 | 12 C | 4.24 V | 510 M | 0 |
1719825023 | 4 | 12.5 C | 4.23 V | 490 M | 0 |
1719823713 | 4 | 12.5 C | 4.24 V | 550 M | 0 |
1719821165 | 0 | 13.1 C | 4.23 V | 590 M | 0 |
1719819191 | 5 | 13.3 C | 4.23 V | 540 M | 0 |
1719817770 | 4 | 13.6 C | 4.23 V | 510 M | 0 |
1719815676 | 4 | 14.1 C | 4.23 V | 480 M | 0 |
1719814919 | 4 | 14.2 C | 4.23 V | 500 M | 0 |
1719812384 | 4 | 14.6 C | 4.23 V | 550 M | 0 |
1719810239 | 3 | 15 C | 4.23 V | 530 M | 0 |
1719808087 | 6 | 15.3 C | 4.23 V | 500 M | 0 |
1719805804 | 6 | 16 C | 4.23 V | 520 M | 0 |
1719803818 | 4 | 16.4 C | 4.23 V | 530 M | 0 |
1719801405 | 5 | 16.9 C | 4.23 V | 510 M | 0 |
1719798600 | 6 | 17.6 C | 4.23 V | 480 M | 0 |
1719796572 | 5 | 18.5 C | 4.23 V | 510 M | 0 |
1719794522 | 8 | 19.1 C | 4.23 V | 540 M | 0 |
1719791610 | 8 | 20.2 C | 4.23 V | 540 M | 0 |
1719788650 | 7 | 21.5 C | 4.23 V | 540 M | 0 |
1719787083 | 6 | 22.1 C | 4.23 V | 530 M | 0 |
*Used Equation Coefficients:
Sate: 0, 1, 0
Temp: 0, 0.1, -50
Volt: 0, 0.01, 0
Alt: 0, 10, 0
A5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)