This is the latest recevied telemetry packets stored in our database for station/object KK5CM-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Room* | Battery* | Eff1h* | Rx1h* | Dg1h* |
---|---|---|---|---|---|
1719905293 | 20 C | 13.58 Volt | 34 Pcnt | 50 Pkt | 20 Pkt |
1719904693 | 17.5 C | 13.43 Volt | 36 Pcnt | 60 Pkt | 20 Pkt |
1719904092 | 21 C | 13.58 Volt | 37 Pcnt | 80 Pkt | 30 Pkt |
1719903491 | 20.5 C | 13.58 Volt | 36 Pcnt | 80 Pkt | 30 Pkt |
1719902892 | 18 C | 13.58 Volt | 41 Pcnt | 100 Pkt | 40 Pkt |
1719902291 | 21 C | 13.58 Volt | 47 Pcnt | 120 Pkt | 50 Pkt |
1719901691 | 20 C | 13.58 Volt | 50 Pcnt | 130 Pkt | 50 Pkt |
1719901091 | 17.5 C | 13.58 Volt | 48 Pcnt | 120 Pkt | 50 Pkt |
1719900491 | 21 C | 13.58 Volt | 47 Pcnt | 120 Pkt | 50 Pkt |
1719899891 | 20 C | 13.58 Volt | 44 Pcnt | 120 Pkt | 50 Pkt |
1719899292 | 17.5 C | 13.58 Volt | 45 Pcnt | 120 Pkt | 50 Pkt |
1719898691 | 20.5 C | 13.58 Volt | 42 Pcnt | 110 Pkt | 50 Pkt |
1719898091 | 19 C | 13.58 Volt | 43 Pcnt | 100 Pkt | 40 Pkt |
1719897491 | 19.5 C | 13.58 Volt | 42 Pcnt | 80 Pkt | 40 Pkt |
1719896891 | 20 C | 13.58 Volt | 45 Pcnt | 100 Pkt | 40 Pkt |
1719896291 | 17.5 C | 13.58 Volt | 46 Pcnt | 90 Pkt | 40 Pkt |
1719895696 | 20.5 C | 13.58 Volt | 40 Pcnt | 70 Pkt | 30 Pkt |
1719895091 | 19 C | 13.58 Volt | 32 Pcnt | 50 Pkt | 20 Pkt |
1719894491 | 19 C | 13.58 Volt | 29 Pcnt | 50 Pkt | 30 Pkt |
1719893891 | 20 C | 13.58 Volt | 27 Pcnt | 40 Pkt | 20 Pkt |
1719893291 | 17 C | 13.58 Volt | 23 Pcnt | 30 Pkt | 20 Pkt |
*Used Equation Coefficients:
Room: 0, 0.5, -64
Battery: 0, 0.075, 0
Eff1h: 0, 1, 0
Rx1h: 0, 10, 0
Dg1h: 0, 10, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)