This is the latest recevied telemetry packets stored in our database for station/object EB3CXQ-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | VBAT* | Value2* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1719966601 | 3.94 V | 0 | 0 | 0 | 0 |
1719966301 | 3.9 V | 0 | 0 | 0 | 0 |
1719966001 | 3.94 V | 0 | 0 | 0 | 0 |
1719965701 | 3.94 V | 0 | 0 | 0 | 0 |
1719965401 | 3.9 V | 0 | 0 | 0 | 0 |
1719965101 | 3.9 V | 0 | 0 | 0 | 0 |
1719964801 | 3.94 V | 0 | 0 | 0 | 0 |
1719964501 | 3.9 V | 0 | 0 | 0 | 0 |
1719964200 | 3.94 V | 0 | 0 | 0 | 0 |
1719963901 | 3.9 V | 0 | 0 | 0 | 0 |
1719963601 | 3.94 V | 0 | 0 | 0 | 0 |
1719963301 | 3.94 V | 0 | 0 | 0 | 0 |
1719963001 | 3.94 V | 0 | 0 | 0 | 0 |
1719962700 | 3.94 V | 0 | 0 | 0 | 0 |
1719962400 | 3.9 V | 0 | 0 | 0 | 0 |
1719962100 | 3.9 V | 0 | 0 | 0 | 0 |
1719961801 | 3.94 V | 0 | 0 | 0 | 0 |
1719961501 | 3.94 V | 0 | 0 | 0 | 0 |
1719961200 | 3.94 V | 0 | 0 | 0 | 0 |
1719960900 | 3.9 V | 0 | 0 | 0 | 0 |
1719960600 | 3.94 V | 0 | 0 | 0 | 0 |
1719960301 | 3.9 V | 0 | 0 | 0 | 0 |
1719960001 | 3.94 V | 0 | 0 | 0 | 0 |
1719959701 | 3.9 V | 0 | 0 | 0 | 0 |
1719959400 | 3.9 V | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
VBAT: 0, 0.01, 0
Value2: 0, 0, 0
Value3: 0, 0, 0
Value4: 0, 0, 0
Value5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)