This is the latest recevied telemetry packets stored in our database for station/object EB3CXQ-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | VBAT* | Value2* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1719415800 | 3.94 V | 0 | 0 | 0 | 0 |
1719415501 | 3.9 V | 0 | 0 | 0 | 0 |
1719415201 | 3.9 V | 0 | 0 | 0 | 0 |
1719414901 | 3.94 V | 0 | 0 | 0 | 0 |
1719414600 | 3.94 V | 0 | 0 | 0 | 0 |
1719414301 | 3.9 V | 0 | 0 | 0 | 0 |
1719414001 | 3.9 V | 0 | 0 | 0 | 0 |
1719413701 | 3.94 V | 0 | 0 | 0 | 0 |
1719413401 | 3.89 V | 0 | 0 | 0 | 0 |
1719413100 | 3.94 V | 0 | 0 | 0 | 0 |
1719412800 | 3.94 V | 0 | 0 | 0 | 0 |
1719412501 | 3.93 V | 0 | 0 | 0 | 0 |
1719412201 | 3.84 V | 0 | 0 | 0 | 0 |
1719411901 | 3.83 V | 0 | 0 | 0 | 0 |
1719411600 | 3.82 V | 0 | 0 | 0 | 0 |
1719411300 | 3.84 V | 0 | 0 | 0 | 0 |
1719411001 | 3.9 V | 0 | 0 | 0 | 0 |
1719410701 | 3.89 V | 0 | 0 | 0 | 0 |
1719410401 | 3.89 V | 0 | 0 | 0 | 0 |
1719410101 | 3.94 V | 0 | 0 | 0 | 0 |
1719409801 | 3.94 V | 0 | 0 | 0 | 0 |
1719409501 | 3.94 V | 0 | 0 | 0 | 0 |
1719409201 | 3.88 V | 0 | 0 | 0 | 0 |
1719408901 | 3.9 V | 0 | 0 | 0 | 0 |
1719408601 | 3.94 V | 0 | 0 | 0 | 0 |
*Used Equation Coefficients:
VBAT: 0, 0.01, 0
Value2: 0, 0, 0
Value3: 0, 0, 0
Value4: 0, 0, 0
Value5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)