This is the latest recevied telemetry packets stored in our database for station/object HS2EBX. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | RxTraffic* | TxTraffic* | RxDrop* | RSSI* | Voltage* |
---|---|---|---|---|---|
1719345451 | 0 Pkt | 0 Pkt | 0 Pkt | -36 dBm | 0.37 V |
1719343629 | 0 Pkt | 0 Pkt | 0 Pkt | -37 dBm | 0.39 V |
1719341807 | 0 Pkt | 0 Pkt | 0 Pkt | -34 dBm | 0.18 V |
1719339985 | 0 Pkt | 0 Pkt | 0 Pkt | -35 dBm | 0.16 V |
1719338163 | 0 Pkt | 0 Pkt | 0 Pkt | -36 dBm | 0.16 V |
1719336341 | 0 Pkt | 0 Pkt | 0 Pkt | -34 dBm | 0.16 V |
1719334519 | 0 Pkt | 0 Pkt | 0 Pkt | -35 dBm | 0.18 V |
1719332697 | 0 Pkt | 0 Pkt | 0 Pkt | -34 dBm | 0.25 V |
1719330876 | 0 Pkt | 0 Pkt | 0 Pkt | -34 dBm | 0.37 V |
1719329053 | 0 Pkt | 0 Pkt | 0 Pkt | -37 dBm | 0.21 V |
1719327231 | 0 Pkt | 0 Pkt | 0 Pkt | -34 dBm | 0.29 V |
1719325409 | 0 Pkt | 0 Pkt | 0 Pkt | -37 dBm | 0.18 V |
1719323590 | 0 Pkt | 0 Pkt | 0 Pkt | -38 dBm | 0.18 V |
1719321765 | 0 Pkt | 0 Pkt | 0 Pkt | -37 dBm | 0.21 V |
1719319943 | 0 Pkt | 0 Pkt | 0 Pkt | -32 dBm | 0.21 V |
1719318121 | 0 Pkt | 0 Pkt | 0 Pkt | -32 dBm | 0.27 V |
1719316299 | 0 Pkt | 0 Pkt | 0 Pkt | -36 dBm | 0.21 V |
1719314477 | 0 Pkt | 0 Pkt | 0 Pkt | -33 dBm | 0.33 V |
1719312655 | 0 Pkt | 0 Pkt | 0 Pkt | -35 dBm | 0.31 V |
1719310833 | 0 Pkt | 0 Pkt | 0 Pkt | -32 dBm | 0.29 V |
1719309011 | 0 Pkt | 0 Pkt | 0 Pkt | -35 dBm | 0.25 V |
1719307189 | 0 Pkt | 0 Pkt | 0 Pkt | -35 dBm | 0.16 V |
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
RSSI: 0, -1, 0
Voltage: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)