This is the latest recevied telemetry packets stored in our database for station/object ED5YAM. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | VOLT* | TMP* | TX* | WIND* | CHG* |
---|---|---|---|---|---|
1720166266 | 513 | 603 | 999 | 29 | 570 |
1720166085 | 512 | 603 | 999 | 65 | 568 |
1720165905 | 511 | 603 | 999 | 39 | 566 |
1720165725 | 510 | 603 | 999 | 70 | 563 |
1720165545 | 509 | 603 | 999 | 88 | 561 |
1720165364 | 508 | 603 | 999 | 113 | 559 |
1720165178 | 508 | 602 | 999 | 28 | 556 |
1720164998 | 507 | 602 | 834 | 44 | 555 |
1720164818 | 507 | 602 | 999 | 91 | 552 |
1720164636 | 506 | 602 | 999 | 113 | 550 |
1720164453 | 506 | 602 | 999 | 92 | 547 |
1720164271 | 504 | 602 | 834 | 94 | 545 |
1720164089 | 504 | 602 | 999 | 91 | 542 |
1720163909 | 504 | 602 | 999 | 106 | 541 |
1720163725 | 503 | 602 | 999 | 88 | 539 |
1720163545 | 503 | 602 | 999 | 91 | 537 |
1720163365 | 502 | 602 | 999 | 84 | 535 |
1720163185 | 502 | 602 | 999 | 117 | 532 |
1720163003 | 501 | 602 | 999 | 78 | 530 |
1720162822 | 500 | 602 | 999 | 63 | 528 |
1720162642 | 501 | 602 | 999 | 74 | 526 |
1720162462 | 501 | 602 | 999 | 59 | 524 |
1720162281 | 500 | 602 | 999 | 104 | 522 |
1720162101 | 500 | 602 | 999 | 95 | 521 |
1720161921 | 500 | 602 | 999 | 46 | 519 |
*Used Equation Coefficients:
VOLT: 0, 1, 0
TMP: 0, 1, 0
TX: 0, 1, 0
WIND: 0, 1, 0
CHG: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)