This is the latest recevied telemetry packets stored in our database for station/object ED5YAM. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | VOLT* | TMP* | TX* | WIND* | CHG* |
---|---|---|---|---|---|
1720412089 | 497 | 596 | 999 | 31 | 499 |
1720411908 | 497 | 596 | 999 | 15 | 499 |
1720411728 | 497 | 596 | 999 | 4 | 498 |
1720411548 | 497 | 596 | 999 | 4 | 498 |
1720411368 | 497 | 596 | 999 | 4 | 499 |
1720411188 | 497 | 596 | 999 | 4 | 499 |
1720411008 | 497 | 596 | 999 | 4 | 498 |
1720410828 | 497 | 596 | 999 | 18 | 498 |
1720410647 | 497 | 596 | 999 | 15 | 499 |
1720410464 | 497 | 596 | 999 | 4 | 498 |
1720410282 | 497 | 596 | 999 | 4 | 498 |
1720410103 | 497 | 596 | 999 | 4 | 498 |
1720409921 | 497 | 596 | 999 | 4 | 498 |
1720409741 | 497 | 596 | 999 | 4 | 499 |
1720409561 | 497 | 596 | 999 | 4 | 499 |
1720409381 | 497 | 596 | 999 | 18 | 499 |
1720409201 | 497 | 596 | 999 | 25 | 499 |
1720409021 | 497 | 596 | 999 | 24 | 499 |
1720408840 | 497 | 596 | 999 | 21 | 498 |
1720408660 | 497 | 596 | 999 | 7 | 498 |
1720408480 | 497 | 596 | 999 | 11 | 498 |
1720408300 | 497 | 596 | 999 | 73 | 498 |
1720408120 | 497 | 596 | 999 | 32 | 498 |
1720407937 | 497 | 596 | 999 | 57 | 499 |
1720407757 | 497 | 596 | 999 | 65 | 498 |
*Used Equation Coefficients:
VOLT: 0, 1, 0
TMP: 0, 1, 0
TX: 0, 1, 0
WIND: 0, 1, 0
CHG: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)