RADIOCULT.SU - APRS Track Direct

My position About ☰

reset

URANUM Telemetry

This is the latest recevied telemetry packets stored in our database for station/object URANUM. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).

Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).

<< 1 2 3 4 5 6 >>

Time	Value1*	Value3*	Value4*	Value5*
1730393256	13	11	14	43
1730392991	13	12	14	43
1730392716	13.1	11	14	43
1730392446	13	11	15	43
1730392176	13	11	14	43
1730391908	13	11	14	43
1730391366	13	11	14	43
1730391101	13	11	14	43
1730390826	13	11	14	43
1730390287	12.9	11	14	43
1730390017	12.9	11	14	43
1730389746	12.9	11	14	43
1730389478	12.8	11	14	43
1730389206	12.4	11	14	43
1730388936	13	11	14	43
1730388397	13	11	14	43
1730388128	12.9	11	14	43
1730387856	12.9	11	14	43
1730387587	12.9	12	15	43
1730387316	12.9	11	14	43
1730387046	12.9	11	14	43
1730386776	12.8	11	14	43
1730386506	12.8	11	14	43
1730386236	12.8	11	14	43
1730385967	12.8	11	14	43

*Used Equation Coefficients:

Value1: 0, 1, 0

Value2: 0, 1, 0

Value3: 0, 1, 0

Value4: 0, 1, 0

Value5: 0, 1, 0

The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value² + b * value + c.
The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)