This is the latest recevied telemetry packets stored in our database for station/object KNAPPA-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Value1* | Value2* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1719987062 | 0.06 | 0 | 0 | 0 | 73 |
1719986402 | 0.06 | 0 | 0 | 0 | 73 |
1719986102 | 0.15 | 0 | 0 | 0 | 73 |
1719985442 | 0.04 | 0 | 0 | 0 | 74 |
1719984783 | 0.05 | 0 | 0.04 | 0 | 74 |
1719984122 | 0.18 | 0 | 0.18 | 0 | 74 |
1719983462 | 0.6 | 0 | 0.24 | 0 | 74 |
1719982803 | 1.93 | 0 | 0.97 | 0 | 74 |
1719982502 | 3.16 | 0 | 1.37 | 0 | 74 |
1719981842 | 12.57 | 0 | 5.76 | 0 | 75 |
1719981183 | 14.05 | 0 | 14.19 | 0 | 75 |
1719980522 | 14.11 | 0 | 14.25 | 0 | 75 |
1719979862 | 14.08 | 0 | 14.28 | 0 | 76 |
1719979202 | 14.08 | 0.03 | 14.32 | 0 | 76 |
1719978903 | 14.12 | 0.04 | 14.33 | 0 | 76 |
1719978242 | 14.17 | 0.08 | 14.39 | 0.04 | 76 |
1719977582 | 14.2 | 0.11 | 14.43 | 0.06 | 76 |
1719976922 | 14.24 | 0.18 | 14.51 | 0.13 | 77 |
1719976262 | 14.38 | 0.26 | 18.04 | 0.27 | 77 |
1719975603 | 20.29 | 0.64 | 58.34 | 0.53 | 77 |
1719975303 | 33.68 | 1.07 | 58.71 | 0.45 | 78 |
1719974642 | 62.31 | 1.38 | 60.72 | 0.51 | 78 |
1719973982 | 64.42 | 0.71 | 61.57 | 0.48 | 78 |
1719973322 | 62.33 | 3.06 | 61.89 | 0.53 | 79 |
1719972662 | 60.34 | 2.52 | 61.2 | 0.5 | 79 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)