This is the latest recevied telemetry packets stored in our database for station/object KNAPPA-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Value1* | Value2* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1719971702 | 64.62 | 0.86 | 62.07 | 0.52 | 78 |
1719971042 | 65.08 | 0.72 | 62.28 | 0.52 | 79 |
1719970382 | 61.19 | 6.77 | 62.77 | 0.52 | 79 |
1719969722 | 65.71 | 1.88 | 63.52 | 0.5 | 79 |
1719969062 | 65.32 | 1.48 | 63.04 | 0.51 | 79 |
1719968403 | 66.79 | 0.64 | 64.07 | 0.53 | 78 |
1719968102 | 65.75 | 0.64 | 63.11 | 0.53 | 78 |
1719967442 | 66.65 | 1.23 | 64.33 | 0.56 | 79 |
1719966782 | 65.1 | 4.58 | 63.73 | 0.61 | 79 |
1719966122 | 66.11 | 1.77 | 64.07 | 0.61 | 78 |
1719965462 | 66.13 | 0.68 | 63.58 | 0.6 | 79 |
1719964803 | 67.03 | 1.36 | 65.03 | 0.66 | 79 |
1719964502 | 66.73 | 0.99 | 64.54 | 0.65 | 78 |
1719963842 | 65.19 | 0.68 | 62.89 | 0.61 | 78 |
1719963182 | 66.51 | 1.84 | 64.58 | 0.66 | 78 |
1719962521 | 66.18 | 0.74 | 64.03 | 0.61 | 78 |
1719961862 | 65.53 | 2.45 | 63.57 | 0.59 | 78 |
1719961202 | 65.88 | 4.64 | 64.27 | 0.63 | 78 |
1719960902 | 64.57 | 0.67 | 62.48 | 0.57 | 78 |
1719960242 | 66.09 | 0.74 | 63.83 | 0.63 | 78 |
1719959582 | 65.6 | 3.07 | 63.77 | 0.62 | 77 |
1719958921 | 66.46 | 5.79 | 65.31 | 0.66 | 77 |
1719958262 | 66.49 | 5.32 | 65.1 | 0.66 | 77 |
1719957602 | 66.48 | 1.84 | 64.78 | 0.65 | 77 |
1719957302 | 66.14 | 2.13 | 64.44 | 0.65 | 77 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)