This is the latest recevied telemetry packets stored in our database for station/object KNAPPA-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Value1* | Value2* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1719958921 | 66.46 | 5.79 | 65.31 | 0.66 | 77 |
1719958262 | 66.49 | 5.32 | 65.1 | 0.66 | 77 |
1719957602 | 66.48 | 1.84 | 64.78 | 0.65 | 77 |
1719957302 | 66.14 | 2.13 | 64.44 | 0.65 | 77 |
1719956641 | 66.4 | 1.64 | 64.66 | 0.63 | 78 |
1719955982 | 64.76 | 1.36 | 62.23 | 0.6 | 78 |
1719955322 | 66.05 | 1.66 | 63.77 | 0.6 | 78 |
1719954662 | 66.07 | 1.1 | 63.82 | 0.61 | 78 |
1719954003 | 62.88 | 4.46 | 61.66 | 0.57 | 78 |
1719953702 | 65.37 | 6.29 | 64.21 | 0.63 | 78 |
1719953042 | 66.04 | 5.57 | 64.15 | 0.64 | 78 |
1719952382 | 67.05 | 4.73 | 65.43 | 0.84 | 78 |
1719951722 | 66.02 | 5.25 | 64.88 | 0.68 | 77 |
1719951062 | 67.28 | 6.44 | 65.94 | 2.29 | 77 |
1719950403 | 65.73 | 3.54 | 63.98 | 0.6 | 77 |
1719950102 | 20.78 | 7.06 | 63.34 | 3.32 | 76 |
1719949442 | 20.7 | 6.74 | 61.99 | 0.62 | 77 |
1719948782 | 16.72 | 5.74 | 62.75 | 0.6 | 75 |
1719948123 | 14.27 | 4.5 | 62.88 | 4.7 | 74 |
1719947462 | 14.35 | 5.21 | 63.16 | 5.42 | 74 |
1719946802 | 14.38 | 4.82 | 62.62 | 3.97 | 74 |
1719946502 | 14.45 | 4.96 | 54.19 | 14.95 | 74 |
1719945842 | 14.37 | 5.69 | 16.52 | 6.47 | 74 |
1719945182 | 14.35 | 4.27 | 15.47 | 4.56 | 73 |
1719944522 | 14.28 | 3.97 | 14.63 | 4.01 | 73 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)