This is the latest recevied telemetry packets stored in our database for station/object KNAPPA-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Value1* | Value2* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1719943203 | 14.36 | 4.14 | 14.69 | 4.27 | 73 |
1719942902 | 14.33 | 4.29 | 14.66 | 4.4 | 73 |
1719942241 | 14.3 | 4.37 | 14.71 | 4.53 | 73 |
1719941582 | 14.25 | 3.24 | 14.31 | 3.31 | 72 |
1719940922 | 14.26 | 2.4 | 14.29 | 2.32 | 72 |
1719940262 | 14.24 | 2.31 | 14.3 | 2.3 | 72 |
1719939603 | 14.22 | 3.47 | 14.32 | 3.58 | 72 |
1719939302 | 14.18 | 2.06 | 14.23 | 2.12 | 72 |
1719938642 | 14.26 | 1.86 | 14.24 | 1.87 | 72 |
1719937982 | 14.21 | 2.7 | 14.29 | 2.73 | 72 |
1719937322 | 14.21 | 3.55 | 14.27 | 3.7 | 72 |
1719936662 | 14.26 | 2.28 | 14.24 | 2.25 | 72 |
1719936003 | 14.21 | 2.17 | 14.23 | 2.12 | 72 |
1719935702 | 14.25 | 3.51 | 14.26 | 3.7 | 72 |
1719935042 | 14.14 | 2.66 | 14.24 | 2.69 | 72 |
1719934382 | 14.15 | 1.5 | 14.17 | 1.46 | 72 |
1719933722 | 14.12 | 1.97 | 14.21 | 2.05 | 72 |
1719933062 | 14.16 | 1.97 | 14.2 | 2 | 72 |
1719932403 | 14.19 | 1.95 | 14.16 | 1.97 | 72 |
1719932102 | 14.17 | 1.39 | 14.17 | 1.37 | 72 |
1719931442 | 14.07 | 1.06 | 14.12 | 1.02 | 72 |
1719930782 | 14.44 | 0.72 | 14.58 | 0.67 | 72 |
1719930122 | 14.47 | 0.71 | 14.51 | 0.68 | 72 |
1719929462 | 14.38 | 0.6 | 14.52 | 0.57 | 71 |
1719928803 | 14.29 | 0.44 | 14.47 | 0.41 | 71 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)