This is the latest recevied telemetry packets stored in our database for station/object KNAPPA-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Value1* | Value2* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1720130403 | 61.68 | 1.81 | 60.1 | 0.21 | 76 |
1720130102 | 61.6 | 2.57 | 59.98 | 0.21 | 76 |
1720129442 | 60.84 | 4.93 | 59.84 | 0.21 | 76 |
1720128782 | 61.33 | 2.03 | 60.12 | 0.21 | 75 |
1720128122 | 61.88 | 1.7 | 60.52 | 0.22 | 75 |
1720127462 | 62.11 | 0.7 | 60.64 | 0.22 | 75 |
1720126802 | 62.43 | 0.92 | 60.66 | 0.21 | 75 |
1720126502 | 62.45 | 1.1 | 60.77 | 0.22 | 75 |
1720125842 | 61.65 | 1.46 | 60.53 | 0.22 | 75 |
1720125181 | 61.87 | 0.66 | 60.08 | 0.2 | 75 |
1720124522 | 61.47 | 3.17 | 60.15 | 0.2 | 75 |
1720123862 | 60.81 | 4.07 | 60.07 | 0.2 | 75 |
1720123202 | 61.91 | 1.44 | 60.57 | 0.2 | 75 |
1720122902 | 62.5 | 0.72 | 60.94 | 0.22 | 75 |
1720122242 | 61.48 | 4.77 | 61.12 | 0.2 | 75 |
1720121582 | 62.24 | 2.14 | 61.14 | 0.22 | 75 |
1720120922 | 62.49 | 1.71 | 61.43 | 0.2 | 75 |
1720120262 | 62.64 | 1.78 | 61.37 | 0.23 | 75 |
1720119602 | 63.36 | 0.75 | 61.92 | 0.2 | 75 |
1720119302 | 62.76 | 3.75 | 61.78 | 0.19 | 75 |
1720118642 | 62.62 | 4.48 | 61.33 | 0.19 | 75 |
1720117982 | 62.95 | 1.39 | 61.33 | 0.21 | 76 |
1720117322 | 63.18 | 4.74 | 61.45 | 0.2 | 77 |
1720116662 | 64.02 | 2.98 | 62.04 | 0.19 | 79 |
1720116003 | 14.47 | 8.18 | 60.87 | 3.86 | 78 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)