This is the latest recevied telemetry packets stored in our database for station/object DK5ES-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Temp* | Humi* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1720081384 | 26.3 deg C | 49 % | 0 | 0 | 0 |
1720080484 | 26.2 deg C | 49 % | 0 | 0 | 0 |
1720079584 | 26.2 deg C | 48.9 % | 0 | 0 | 0 |
1720078684 | 26.2 deg C | 49 % | 0 | 0 | 0 |
1720078354 | 26.2 deg C | 49.1 % | 0 | 0 | 0 |
1720077454 | 26.2 deg C | 48.9 % | 0 | 0 | 0 |
1720076554 | 26.2 deg C | 49.1 % | 0 | 0 | 0 |
1720075654 | 26.2 deg C | 49 % | 0 | 0 | 0 |
1720074754 | 26.1 deg C | 49.1 % | 0 | 0 | 0 |
1720073854 | 26.1 deg C | 49.1 % | 0 | 0 | 0 |
1720072954 | 26 deg C | 49.1 % | 0 | 0 | 0 |
1720072054 | 26 deg C | 49.1 % | 0 | 0 | 0 |
1720071154 | 25.9 deg C | 49.3 % | 0 | 0 | 0 |
1720070253 | 25.8 deg C | 49.3 % | 0 | 0 | 0 |
1720069353 | 25.8 deg C | 49.4 % | 0 | 0 | 0 |
1720068453 | 25.7 deg C | 49.2 % | 0 | 0 | 0 |
1720067553 | 25.7 deg C | 48.9 % | 0 | 0 | 0 |
1720066653 | 25.7 deg C | 48.8 % | 0 | 0 | 0 |
1720066321 | 25.7 deg C | 48.7 % | 0 | 0 | 0 |
1720065421 | 25.7 deg C | 48.7 % | 0 | 0 | 0 |
1720064521 | 25.8 deg C | 48.7 % | 0 | 0 | 0 |
1720063620 | 25.8 deg C | 48.7 % | 0 | 0 | 0 |
1720062720 | 25.8 deg C | 48.8 % | 0 | 0 | 0 |
1720061820 | 25.8 deg C | 48.8 % | 0 | 0 | 0 |
1720060920 | 25.8 deg C | 48.8 % | 0 | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)