This is the latest recevied telemetry packets stored in our database for station/object WH6AZ-13. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Battery* | Charge* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1719799572 | 3.59 Volts | 38 % | 0 | 0 | 0 |
1719799284 | 3.59 Volts | 38 % | 0 | 0 | 0 |
1719798344 | 3.59 Volts | 38 % | 0 | 0 | 0 |
1719798056 | 3.59 Volts | 39 % | 0 | 0 | 0 |
1719797768 | 3.59 Volts | 39 % | 0 | 0 | 0 |
1719797480 | 3.59 Volts | 38 % | 0 | 0 | 0 |
1719797193 | 3.59 Volts | 38 % | 0 | 0 | 0 |
1719796544 | 3.59 Volts | 37 % | 0 | 0 | 0 |
1719796254 | 3.59 Volts | 38 % | 0 | 0 | 0 |
1719795966 | 3.59 Volts | 38 % | 0 | 0 | 0 |
1719795673 | 3.59 Volts | 38 % | 0 | 0 | 0 |
1719795385 | 3.59 Volts | 38 % | 0 | 0 | 0 |
1719794445 | 3.59 Volts | 38 % | 0 | 0 | 0 |
1719794158 | 3.59 Volts | 39 % | 0 | 0 | 0 |
1719793870 | 3.59 Volts | 38 % | 0 | 0 | 0 |
1719793582 | 3.59 Volts | 38 % | 0 | 0 | 0 |
1719793292 | 3.59 Volts | 38 % | 0 | 0 | 0 |
1719792641 | 3.59 Volts | 38 % | 0 | 0 | 0 |
1719792338 | 3.59 Volts | 38 % | 0 | 0 | 0 |
1719792050 | 3.59 Volts | 38 % | 0 | 0 | 0 |
1719791762 | 3.59 Volts | 38 % | 0 | 0 | 0 |
1719791474 | 3.59 Volts | 38 % | 0 | 0 | 0 |
1719791185 | 3.59 Volts | 38 % | 0 | 0 | 0 |
1719790537 | 3.59 Volts | 38 % | 0 | 0 | 0 |
1719790244 | 3.59 Volts | 38 % | 0 | 0 | 0 |
*Used Equation Coefficients:
Battery: 0, 0.01, 0
Charge: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)