This is the latest recevied telemetry packets stored in our database for station/object K7QEQ-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Value1* | Value2* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1719796533 | 421 | 640 | 0 | 0 | 0 |
1719796414 | 423 | 640 | 0 | 0 | 0 |
1719796294 | 424 | 640 | 0 | 0 | 0 |
1719796175 | 429 | 641 | 0 | 0 | 0 |
1719796055 | 490 | 643 | 0 | 0 | 0 |
1719795936 | 485 | 639 | 0 | 0 | 0 |
1719795816 | 484 | 639 | 0 | 0 | 0 |
1719795697 | 418 | 639 | 0 | 0 | 0 |
1719795577 | 418 | 639 | 0 | 0 | 0 |
1719795458 | 419 | 639 | 0 | 0 | 0 |
1719795338 | 419 | 640 | 0 | 0 | 0 |
1719795219 | 421 | 639 | 0 | 0 | 0 |
1719795099 | 421 | 640 | 0 | 0 | 0 |
1719794980 | 423 | 640 | 0 | 0 | 0 |
1719794860 | 425 | 641 | 0 | 0 | 0 |
1719794741 | 429 | 641 | 0 | 0 | 0 |
1719794621 | 485 | 641 | 0 | 0 | 0 |
1719794502 | 485 | 640 | 0 | 0 | 0 |
1719794382 | 484 | 640 | 0 | 0 | 0 |
1719794263 | 418 | 640 | 0 | 0 | 0 |
1719794143 | 418 | 640 | 0 | 0 | 0 |
1719794024 | 419 | 640 | 0 | 0 | 0 |
1719793904 | 420 | 640 | 0 | 0 | 0 |
1719793785 | 420 | 641 | 0 | 0 | 0 |
1719793665 | 421 | 641 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)