This is the latest recevied telemetry packets stored in our database for station/object K7QEQ-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Value1* | Value2* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1719959468 | 479 | 642 | 0 | 0 | 0 |
1719959349 | 477 | 642 | 0 | 0 | 0 |
1719959229 | 457 | 642 | 0 | 0 | 0 |
1719959110 | 449 | 641 | 0 | 0 | 0 |
1719958990 | 445 | 641 | 0 | 0 | 0 |
1719958871 | 441 | 640 | 0 | 0 | 0 |
1719958751 | 437 | 641 | 0 | 0 | 0 |
1719958632 | 419 | 641 | 0 | 0 | 0 |
1719958512 | 419 | 641 | 0 | 0 | 0 |
1719958393 | 419 | 640 | 0 | 0 | 0 |
1719958273 | 419 | 640 | 0 | 0 | 0 |
1719958154 | 419 | 640 | 0 | 0 | 0 |
1719958034 | 419 | 640 | 0 | 0 | 0 |
1719957915 | 419 | 640 | 0 | 0 | 0 |
1719957796 | 419 | 640 | 0 | 0 | 0 |
1719957676 | 419 | 640 | 0 | 0 | 0 |
1719957557 | 419 | 640 | 0 | 0 | 0 |
1719957438 | 419 | 640 | 0 | 0 | 0 |
1719957318 | 419 | 639 | 0 | 0 | 0 |
1719957198 | 420 | 639 | 0 | 0 | 0 |
1719957079 | 419 | 639 | 0 | 0 | 0 |
1719956959 | 419 | 639 | 0 | 0 | 0 |
1719956840 | 419 | 639 | 0 | 0 | 0 |
1719956720 | 420 | 639 | 0 | 0 | 0 |
1719956601 | 419 | 639 | 0 | 0 | 0 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)