This is the latest recevied telemetry packets stored in our database for station/object PU2LYJ-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Temp* | U.Rel.* | UpTime* | Pkts* | VCC* |
---|---|---|---|---|---|
1718574274 | 32 *C | 38 % | 10 hours | 106 pkts | 13.7 volts |
1718573324 | 32 *C | 38 % | 10 hours | 84 pkts | 13.6 volts |
1718571468 | 32 *C | 39 % | 10 hours | 106 pkts | 13.7 volts |
1718568649 | 32 *C | 40 % | 9 hours | 78 pkts | 13.6 volts |
1718567716 | 32 *C | 41 % | 9 hours | 98 pkts | 13.7 volts |
1718566806 | 32 *C | 41 % | 9 hours | 76 pkts | 13.6 volts |
1718566225 | 32 *C | 41 % | 8 hours | 95 pkts | 13.6 volts |
1718564352 | 31 *C | 41 % | 8 hours | 71 pkts | 13.7 volts |
1718562489 | 31 *C | 42 % | 7 hours | 137 pkts | 13.6 volts |
1718555818 | 29 *C | 44 % | 5 hours | 231 pkts | 13.7 volts |
1718552891 | 29 *C | 45 % | 5 hours | 106 pkts | 13.7 volts |
1718551953 | 29 *C | 45 % | 4 hours | 125 pkts | 13.7 volts |
1718547207 | 28 *C | 48 % | 3 hours | 128 pkts | 13.6 volts |
1718546242 | 27 *C | 48 % | 3 hours | 132 pkts | 13.7 volts |
1718540398 | 26 *C | 52 % | 1 hours | 170 pkts | 13.7 volts |
1718538465 | - | - | - | - | - |
1718536592 | 25 *C | 55 % | 0 hours | 87 pkts | 13.6 volts |
1718533810 | 22 *C | 60 % | 0 hours | 77 pkts | 13.7 volts |
1718532920 | 23 *C | 60 % | 0 hours | 9 pkts | 13.7 volts |
*Used Equation Coefficients:
Temp: 0, 1, 0
U.Rel.: 0, 1, 0
UpTime: 0, 1, 0
Pkts: 0, 1, 0
VCC: 0, 0.1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)