This is the latest recevied telemetry packets stored in our database for station/object OK1XRV-15. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Value1* | Value2* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1718549495 | 153 | 172 | 152 | 114 | 125 |
1718548764 | 153 | 172 | 152 | 138 | 129 |
1718548032 | 153 | 172 | 152 | 139 | 134 |
1718547665 | 153 | 172 | 153 | 141 | 137 |
1718547299 | 153 | 172 | 153 | 142 | 137 |
1718546567 | 153 | 172 | 153 | 145 | 134 |
1718543639 | 153 | 172 | 152 | 76 | 127 |
1718542175 | 153 | 172 | 152 | 143 | 137 |
1718539613 | 153 | 172 | 152 | 146 | 132 |
1718538515 | 153 | 172 | 152 | 136 | 137 |
1718538149 | 153 | 172 | 152 | 139 | 133 |
1718537783 | 153 | 172 | 152 | 160 | 137 |
1718536319 | 153 | 172 | 151 | 164 | 139 |
1718535587 | 153 | 172 | 151 | 136 | 138 |
1718535221 | 153 | 172 | 151 | 130 | 138 |
1718534855 | 153 | 172 | 151 | 134 | 138 |
1718534122 | 153 | 172 | 151 | 132 | 138 |
1718532293 | 153 | 172 | 151 | 135 | 138 |
1718528998 | 152 | 172 | 151 | 139 | 138 |
1718527168 | 152 | 172 | 151 | 140 | 138 |
1718526802 | 152 | 172 | 151 | 141 | 138 |
1718525339 | 152 | 172 | 151 | 141 | 137 |
1718522776 | 152 | 172 | 151 | 145 | 137 |
1718520580 | 152 | 172 | 151 | 140 | 135 |
1718519848 | 152 | 172 | 151 | 140 | 132 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)