This is the latest recevied telemetry packets stored in our database for station/object OE5XYZ-12. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | press* | temp.in* | hum* | QNH* | temp.out* |
---|---|---|---|---|---|
1719569270 | 987.6 hPa | 31.8 C deg | 0 % | 1017.4 hPa | 0 C deg |
1719568069 | 987.7 hPa | 31.6 C deg | 0 % | 1017.4 hPa | 0 C deg |
1719566869 | 987.6 hPa | 31.4 C deg | 0 % | 1017.4 hPa | 0 C deg |
1719565670 | 987.6 hPa | 31.6 C deg | 0 % | 1017.3 hPa | 0 C deg |
1719563269 | 987.6 hPa | 31.2 C deg | 0 % | 1017.4 hPa | 0 C deg |
1719562069 | 987.4 hPa | 31.4 C deg | 0 % | 1017.1 hPa | 0 C deg |
1719560869 | 987.2 hPa | 31.2 C deg | 0 % | 1017 hPa | 0 C deg |
1719559669 | 987.1 hPa | 31 C deg | 0 % | 1016.9 hPa | 0 C deg |
1719558469 | 986.9 hPa | 31.1 C deg | 0 % | 1016.7 hPa | 0 C deg |
1719556068 | 986.8 hPa | 30.9 C deg | 0 % | 1016.6 hPa | 0 C deg |
1719554868 | 986.6 hPa | 31 C deg | 0 % | 1016.4 hPa | 0 C deg |
1719553668 | 986.4 hPa | 30.9 C deg | 0 % | 1016.2 hPa | 0 C deg |
1719550068 | 986 hPa | 30.2 C deg | 0 % | 1015.9 hPa | 0 C deg |
1719548868 | 985.8 hPa | 30.1 C deg | 0 % | 1015.6 hPa | 0 C deg |
1719547668 | 985.7 hPa | 30.4 C deg | 0 % | 1015.5 hPa | 0 C deg |
1719546468 | 985.3 hPa | 30.2 C deg | 0 % | 1015.2 hPa | 0 C deg |
1719545268 | 985.2 hPa | 30 C deg | 0 % | 1015 hPa | 0 C deg |
1719544067 | 985 hPa | 30.1 C deg | 0 % | 1014.9 hPa | 0 C deg |
*Used Equation Coefficients:
press: 0, 1, 0
temp.in: 0, 1, 0
hum: 0, 1, 0
QNH: 0, 1, 0
temp.out: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)