This is the latest recevied telemetry packets stored in our database for station/object IU1DOF-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | RSSI* | VBAT* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1717306960 | -19 dbm | 2.93 V | 0 | 0 | 0 |
1717306345 | -19 dbm | 2.93 V | 0 | 0 | 0 |
1717305720 | -18 dbm | 2.93 V | 0 | 0 | 0 |
1717305097 | -19 dbm | 2.93 V | 0 | 0 | 0 |
1717304473 | -20 dbm | 2.93 V | 0 | 0 | 0 |
1717303849 | -19 dbm | 2.94 V | 0 | 0 | 0 |
1717303240 | -18 dbm | 2.93 V | 0 | 0 | 0 |
1717302632 | -19 dbm | 2.93 V | 0 | 0 | 0 |
1717302024 | -19 dbm | 2.93 V | 0 | 0 | 0 |
1717301416 | -19 dbm | 2.93 V | 0 | 0 | 0 |
1717300793 | -18 dbm | 2.93 V | 0 | 0 | 0 |
1717300181 | -19 dbm | 2.93 V | 0 | 0 | 0 |
1717299560 | -18 dbm | 2.93 V | 0 | 0 | 0 |
1717298938 | -18 dbm | 2.93 V | 0 | 0 | 0 |
1717298320 | -19 dbm | 2.93 V | 0 | 0 | 0 |
1717297705 | -18 dbm | 2.93 V | 0 | 0 | 0 |
*Used Equation Coefficients:
RSSI: 0, -1, 0
VBAT: 0, 0.01, 0
Value3: 0, 0, 0
Value4: 0, 0, 0
Value5: 0, 0, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)