This is the latest recevied telemetry packets stored in our database for station/object KI5NYZ-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Temp* | Load* | FreeMem* | Value4* | Value5* |
---|---|---|---|---|---|
1720481129 | 55.84 | 0.02 | 305 | 0 | 0 |
1720480529 | 55.84 | 0.02 | 304 | 0 | 0 |
1720479929 | 56.92 | 0 | 306 | 0 | 0 |
1720479329 | 56.38 | 0.04 | 306 | 0 | 0 |
1720478729 | 56.38 | 0 | 306 | 0 | 0 |
1720478129 | 55.84 | 0.02 | 304 | 0 | 0 |
1720477529 | 55.84 | 0.03 | 308 | 0 | 0 |
1720476929 | 56.92 | 0.03 | 302 | 0 | 0 |
1720476329 | 55.84 | 0.05 | 309 | 0 | 0 |
1720475728 | 56.38 | 0.1 | 313 | 0 | 0 |
1720475128 | 56.38 | 0.02 | 307 | 0 | 0 |
1720474528 | 56.38 | 0.05 | 308 | 0 | 0 |
1720473928 | 55.84 | 0.03 | 307 | 0 | 0 |
1720473329 | 56.38 | 0.06 | 307 | 0 | 0 |
1720472728 | 55.84 | 0.04 | 305 | 0 | 0 |
1720472128 | 56.38 | 0.02 | 308 | 0 | 0 |
1720471531 | 55.84 | 0.02 | 306 | 0 | 0 |
1720470928 | 55.84 | 0.03 | 314 | 0 | 0 |
1720470328 | 55.84 | 0.13 | 304 | 0 | 0 |
1720469727 | 56.38 | 0.04 | 329 | 0 | 0 |
1720469127 | 55.84 | 0.01 | 327 | 0 | 0 |
1720468527 | 55.84 | 0.03 | 329 | 0 | 0 |
1720467927 | 55.84 | 0.04 | 326 | 0 | 0 |
1720467327 | 55.31 | 0.02 | 330 | 0 | 0 |
1720466727 | 56.38 | 0.08 | 329 | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.001, 0
Load: 0, 0.001, 0
FreeMem: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)