This is the latest recevied telemetry packets stored in our database for station/object KI5NYZ-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Temp* | Load* | FreeMem* | Value4* | Value5* |
---|---|---|---|---|---|
1720437924 | 56.92 | 0.3 | 334 | 0 | 0 |
1720437324 | 55.84 | 0.01 | 509 | 0 | 0 |
1720436724 | 55.84 | 0.03 | 501 | 0 | 0 |
1720436124 | 55.31 | 0.01 | 507 | 0 | 0 |
1720435523 | 55.84 | 0.08 | 504 | 0 | 0 |
1720434923 | 55.84 | 0.02 | 509 | 0 | 0 |
1720434323 | 55.84 | 0.02 | 511 | 0 | 0 |
1720433724 | 54.77 | 0.02 | 501 | 0 | 0 |
1720433123 | 55.84 | 0.04 | 505 | 0 | 0 |
1720432523 | 55.84 | 0 | 501 | 0 | 0 |
1720431923 | 55.84 | 0.02 | 502 | 0 | 0 |
1720431323 | 55.84 | 0 | 506 | 0 | 0 |
1720430723 | 55.84 | 0 | 502 | 0 | 0 |
1720430123 | 55.84 | 0.04 | 507 | 0 | 0 |
1720429523 | 55.84 | 0.03 | 500 | 0 | 0 |
1720428922 | 55.84 | 0.05 | 503 | 0 | 0 |
1720428323 | 55.84 | 0.17 | 505 | 0 | 0 |
1720427723 | 55.84 | 0.03 | 502 | 0 | 0 |
1720427123 | 55.84 | 0.16 | 502 | 0 | 0 |
1720426522 | 56.38 | 0.18 | 503 | 0 | 0 |
1720425927 | 55.84 | 0.02 | 539 | 0 | 0 |
1720425322 | 55.84 | 0.03 | 540 | 0 | 0 |
1720424722 | 55.84 | 0.03 | 537 | 0 | 0 |
1720424123 | 55.84 | 0.02 | 542 | 0 | 0 |
1720423522 | 54.77 | 0.02 | 540 | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.001, 0
Load: 0, 0.001, 0
FreeMem: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)