This is the latest recevied telemetry packets stored in our database for station/object OE7MFI-21. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | press* | temp.in* | hum* | QNH* | temp.out* |
---|---|---|---|---|---|
1720067653 | 918.2 hPa | 26 C deg | 36 % | 1018 hPa | 0 C deg |
1720043631 | 917.6 hPa | 26.8 C deg | 37.4 % | 1017 hPa | 0 C deg |
1720036445 | 916.8 hPa | 27 C deg | 37.6 % | 1016.1 hPa | 0 C deg |
1720031658 | 915.7 hPa | 27.2 C deg | 37.9 % | 1014.8 hPa | 0 C deg |
1720025637 | 914.6 hPa | 27.4 C deg | 38 % | 1013.5 hPa | 0 C deg |
1720024447 | 914.5 hPa | 27.4 C deg | 38.2 % | 1013.4 hPa | 0 C deg |
1720023242 | 914.2 hPa | 27.5 C deg | 38.1 % | 1013.1 hPa | 0 C deg |
1720016040 | 913.8 hPa | 27.9 C deg | 36.6 % | 1012.5 hPa | 0 C deg |
1720011237 | 914.2 hPa | 28.2 C deg | 36.2 % | 1012.7 hPa | 0 C deg |
1720010051 | 914.3 hPa | 28.4 C deg | 35.3 % | 1012.9 hPa | 0 C deg |
1720008843 | 914.6 hPa | 27.8 C deg | 36.3 % | 1013.4 hPa | 0 C deg |
1720007655 | 914.7 hPa | 27.6 C deg | 36.5 % | 1013.6 hPa | 0 C deg |
1720005240 | 915.2 hPa | 27.4 C deg | 36.5 % | 1014.1 hPa | 0 C deg |
1720001655 | 915.8 hPa | 27.3 C deg | 37.8 % | 1014.9 hPa | 0 C deg |
1720000438 | 916 hPa | 27.1 C deg | 37.9 % | 1015.2 hPa | 0 C deg |
1719999242 | 916.3 hPa | 27 C deg | 37.5 % | 1015.6 hPa | 0 C deg |
*Used Equation Coefficients:
press: 0, 1, 0
temp.in: 0, 1, 0
hum: 0, 1, 0
QNH: 0, 1, 0
temp.out: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)