This is the latest recevied telemetry packets stored in our database for station/object W6BSD-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Temp* | Load* | FreeMem* | Value4* | Value5* |
---|---|---|---|---|---|
1719972688 | 41.16 | 0.59 | 119 | 0 | 0 |
1719972088 | 43.31 | 2.07 | 120 | 0 | 0 |
1719971488 | 43.31 | 1.48 | 120 | 0 | 0 |
1719970888 | 44.39 | 1.61 | 120 | 0 | 0 |
1719970288 | 43.31 | 1.26 | 121 | 0 | 0 |
1719969688 | 43.31 | 1.06 | 121 | 0 | 0 |
1719969087 | 44.39 | 0.92 | 122 | 0 | 0 |
1719968488 | 45.46 | 1.16 | 122 | 0 | 0 |
1719967887 | 44.93 | 1.24 | 122 | 0 | 0 |
1719967287 | 44.93 | 1.67 | 123 | 0 | 0 |
1719966687 | 43.85 | 0.27 | 123 | 0 | 0 |
1719966087 | 43.85 | 1.29 | 123 | 0 | 0 |
1719965487 | 44.93 | 1.27 | 124 | 0 | 0 |
1719964887 | 44.39 | 0.53 | 124 | 0 | 0 |
1719964287 | 45.46 | 1.86 | 125 | 0 | 0 |
1719963686 | 45.46 | 1.31 | 125 | 0 | 0 |
1719963086 | 44.39 | 0.14 | 126 | 0 | 0 |
1719961883 | 43.31 | 0.41 | 113 | 0 | 0 |
1719961283 | 44.93 | 1.43 | 113 | 0 | 0 |
1719960683 | 43.31 | 0.15 | 114 | 0 | 0 |
1719960083 | 43.31 | 0.27 | 114 | 0 | 0 |
1719959483 | 43.31 | 0.36 | 114 | 0 | 0 |
1719958883 | 44.39 | 1.43 | 114 | 0 | 0 |
1719958283 | 43.31 | 0.17 | 113 | 0 | 0 |
1719957683 | 43.31 | 0.15 | 113 | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.001, 0
Load: 0, 0.001, 0
FreeMem: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)