This is the latest recevied telemetry packets stored in our database for station/object W6BSD-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Temp* | Load* | FreeMem* | Value4* | Value5* |
---|---|---|---|---|---|
1719955882 | 42.77 | 0.45 | 114 | 0 | 0 |
1719955282 | 42.24 | 1.2 | 114 | 0 | 0 |
1719954682 | 43.31 | 1.62 | 113 | 0 | 0 |
1719954082 | 43.31 | 1.62 | 113 | 0 | 0 |
1719953482 | 42.77 | 1.56 | 113 | 0 | 0 |
1719952882 | 42.24 | 1.36 | 114 | 0 | 0 |
1719952282 | 42.77 | 1.86 | 114 | 0 | 0 |
1719951681 | 42.24 | 1.56 | 114 | 0 | 0 |
1719951081 | 42.24 | 1.24 | 114 | 0 | 0 |
1719950481 | 41.16 | 0.68 | 114 | 0 | 0 |
1719949881 | 42.24 | 1.47 | 114 | 0 | 0 |
1719949281 | 41.16 | 1.66 | 114 | 0 | 0 |
1719948681 | 40.62 | 0.93 | 115 | 0 | 0 |
1719948081 | 40.62 | 0.55 | 115 | 0 | 0 |
1719947481 | 41.16 | 1.52 | 115 | 0 | 0 |
1719946881 | 40.08 | 1.32 | 116 | 0 | 0 |
1719946281 | 40.62 | 1.52 | 116 | 0 | 0 |
1719945680 | 41.16 | 1.63 | 116 | 0 | 0 |
1719945080 | 40.08 | 1.35 | 117 | 0 | 0 |
1719944480 | 39.55 | 0.43 | 118 | 0 | 0 |
1719943880 | 40.62 | 1.47 | 118 | 0 | 0 |
1719943280 | 40.62 | 1.76 | 118 | 0 | 0 |
1719942680 | 41.16 | 1.44 | 118 | 0 | 0 |
1719942080 | 41.16 | 1.25 | 119 | 0 | 0 |
1719941480 | 40.62 | 1.54 | 119 | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.001, 0
Load: 0, 0.001, 0
FreeMem: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)