This is the latest recevied telemetry packets stored in our database for station/object W6BSD-2. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Temp* | Load* | FreeMem* | Value4* | Value5* |
---|---|---|---|---|---|
1720120929 | 40.08 | 0.25 | 99 | 0 | 0 |
1720120329 | 40.08 | 0.18 | 99 | 0 | 0 |
1720119728 | 40.08 | 0.11 | 99 | 0 | 0 |
1720119128 | 40.62 | 0.1 | 99 | 0 | 0 |
1720118528 | 40.08 | 0.11 | 99 | 0 | 0 |
1720117928 | 41.16 | 0.25 | 99 | 0 | 0 |
1720117328 | 40.62 | 0.24 | 99 | 0 | 0 |
1720116728 | 39.01 | 0.34 | 99 | 0 | 0 |
1720116128 | 39.01 | 1.03 | 99 | 0 | 0 |
1720115528 | 40.08 | 2.05 | 98 | 0 | 0 |
1720114927 | 39.55 | 1.25 | 99 | 0 | 0 |
1720114327 | 39.01 | 1.01 | 99 | 0 | 0 |
1720113727 | 39.55 | 0.9 | 100 | 0 | 0 |
1720113127 | 37.93 | 1.24 | 100 | 0 | 0 |
1720112527 | 39.01 | 1.5 | 100 | 0 | 0 |
1720111927 | 39.01 | 1.64 | 101 | 0 | 0 |
1720111327 | 38.47 | 1.85 | 101 | 0 | 0 |
1720110727 | 38.47 | 1.59 | 102 | 0 | 0 |
1720110126 | 37.93 | 1.2 | 102 | 0 | 0 |
1720108926 | 37.93 | 1.44 | 103 | 0 | 0 |
1720108326 | 37.39 | 0.96 | 103 | 0 | 0 |
1720107726 | 36.32 | 1.06 | 103 | 0 | 0 |
1720107126 | 37.93 | 1.26 | 103 | 0 | 0 |
1720106526 | 35.78 | 0.34 | 104 | 0 | 0 |
1720105926 | 36.86 | 1.29 | 104 | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.001, 0
Load: 0, 0.001, 0
FreeMem: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)