This is the latest recevied telemetry packets stored in our database for station/object HS6KLJ-6. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | RxTraffic* | TxTraffic* | RxDrop* | RSSI* | Voltage* |
---|---|---|---|---|---|
1719004359 | 0 Pkt | 0 Pkt | 0 Pkt | -53 dBm | 0.1 V |
1719002537 | 0 Pkt | 0 Pkt | 0 Pkt | -51 dBm | 0.1 V |
1719000715 | 0 Pkt | 0 Pkt | 0 Pkt | -53 dBm | 0.1 V |
1718999437 | 0 Pkt | 0 Pkt | 0 Pkt | -47 dBm | 0.1 V |
1718997619 | 0 Pkt | 0 Pkt | 0 Pkt | -50 dBm | 0.1 V |
1718995795 | 0 Pkt | 0 Pkt | 0 Pkt | -47 dBm | 0.1 V |
1718993973 | 0 Pkt | 0 Pkt | 0 Pkt | -48 dBm | 0.1 V |
1718992149 | 0 Pkt | 0 Pkt | 0 Pkt | -48 dBm | 0.1 V |
1718990327 | 0 Pkt | 1 Pkt | 0 Pkt | -51 dBm | 0.1 V |
1718988505 | 0 Pkt | 0 Pkt | 0 Pkt | -50 dBm | 0.1 V |
1718986683 | 0 Pkt | 0 Pkt | 0 Pkt | -47 dBm | 0.1 V |
1718984861 | 0 Pkt | 0 Pkt | 0 Pkt | -47 dBm | 0.1 V |
1718983039 | 0 Pkt | 1 Pkt | 0 Pkt | -55 dBm | 0.1 V |
1718981217 | 0 Pkt | 0 Pkt | 0 Pkt | -48 dBm | 0.1 V |
1718979395 | 0 Pkt | 0 Pkt | 0 Pkt | -52 dBm | 0.1 V |
1718977573 | 0 Pkt | 1 Pkt | 0 Pkt | -52 dBm | 0.1 V |
1718975751 | 0 Pkt | 0 Pkt | 0 Pkt | -50 dBm | 0.1 V |
1718973929 | 13 Pkt | 0 Pkt | 0 Pkt | -52 dBm | 0.08 V |
1718972103 | 2 Pkt | 0 Pkt | 0 Pkt | -49 dBm | 0.1 V |
1718970281 | 0 Pkt | 1 Pkt | 0 Pkt | -49 dBm | 0.1 V |
1718968459 | 3 Pkt | 0 Pkt | 0 Pkt | -49 dBm | 0.1 V |
1718966636 | 10 Pkt | 1 Pkt | 0 Pkt | -52 dBm | 0.1 V |
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
RSSI: 0, -1, 0
Voltage: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)