This is the latest recevied telemetry packets stored in our database for station/object DB0IS. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | BATT* | CPU* | CASE* | OUT* | PA* |
---|---|---|---|---|---|
1719368593 | 26.3 V | 60.6 C | 21.6 C | 21.6 C | 0 W |
1719367993 | 26.3 V | 61.2 C | 21.6 C | 21.6 C | 0 W |
1719367392 | 26.3 V | 60.6 C | 21.6 C | 21.6 C | 0 W |
1719366792 | 26.4 V | 60.1 C | 21.6 C | 21.6 C | 0 W |
1719366192 | 26.3 V | 60.1 C | 21.7 C | 21.7 C | 0 W |
1719365592 | 26.3 V | 60.6 C | 21.7 C | 21.7 C | 0 W |
1719364992 | 26.4 V | 60.6 C | 21.7 C | 21.7 C | 0 W |
1719364392 | 26.3 V | 60.6 C | 21.7 C | 21.7 C | 0 W |
1719363792 | 26.4 V | 60.1 C | 21.7 C | 21.7 C | 0 W |
1719363192 | 26.3 V | 60.6 C | 21.7 C | 21.8 C | 0 W |
1719362592 | 26.3 V | 60.1 C | 21.8 C | 21.8 C | 0 W |
1719361992 | 26.4 V | 60.6 C | 21.8 C | 21.8 C | 0 W |
1719361392 | 26.4 V | 60.6 C | 21.8 C | 21.8 C | 0 W |
1719360792 | 26.4 V | 60.1 C | 21.8 C | 21.8 C | 0 W |
1719360192 | 26.4 V | 60.1 C | 21.8 C | 21.8 C | 0 W |
1719359592 | 26.3 V | 60.1 C | 21.8 C | 21.8 C | 0 W |
1719358992 | 26.4 V | 60.6 C | 21.8 C | 21.8 C | 0 W |
1719358392 | 26.4 V | 60.1 C | 21.8 C | 21.8 C | 0 W |
1719357792 | 26.4 V | 61.2 C | 21.8 C | 21.8 C | 0 W |
1719357191 | 26.3 V | 60.1 C | 21.8 C | 21.8 C | 0 W |
1719356592 | 26.4 V | 60.6 C | 21.8 C | 21.8 C | 0 W |
1719355991 | 26.4 V | 60.6 C | 21.9 C | 21.9 C | 0 W |
1719355394 | 25.7 V | 61.2 C | 21.9 C | 21.9 C | 4 W |
1719354792 | 26.4 V | 61.2 C | 21.9 C | 21.9 C | 0 W |
1719354191 | 26.4 V | 60.6 C | 21.9 C | 22 C | 0 W |
*Used Equation Coefficients:
BATT: 0, 0.1, 0
CPU: 0, 0.1, 0
CASE: 0, 0.1, 0
OUT: 0, 0.1, 0
PA: 0, 0.1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)