This is the latest recevied telemetry packets stored in our database for station/object DM2OV-9. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Temp* | Humi* | Baro* | Value4* | Value5* |
---|---|---|---|---|---|
1719756427 | 25.7 deg C | 78.9 % | 1007.7 hPa | 0 | 0 |
1719755525 | 25.7 deg C | 78.4 % | 1010 hPa | 0 | 0 |
1719754625 | 25.6 deg C | 78.8 % | 1005.2 hPa | 0 | 0 |
1719753720 | 26 deg C | 78.7 % | 1006.3 hPa | 0 | 0 |
1719752824 | 26.1 deg C | 79.4 % | 1008.9 hPa | 0 | 0 |
1719751922 | 26.2 deg C | 79.6 % | 1009 hPa | 0 | 0 |
1719751021 | 25.9 deg C | 79.4 % | 1007.8 hPa | 0 | 0 |
1719750126 | 25.4 deg C | 81.2 % | 1008.3 hPa | 0 | 0 |
1719749226 | 25.5 deg C | 81 % | 1007.1 hPa | 0 | 0 |
1719748327 | 25.9 deg C | 81.4 % | 1005.8 hPa | 0 | 0 |
1719747424 | 26.2 deg C | 81.1 % | 1008.3 hPa | 0 | 0 |
1719746527 | 26.3 deg C | 80.8 % | 1005.7 hPa | 0 | 0 |
1719745629 | 26 deg C | 82.5 % | 1007.8 hPa | 0 | 0 |
1719744728 | 26.2 deg C | 81.4 % | 1007.5 hPa | 0 | 0 |
1719743831 | 26.3 deg C | 80.5 % | 1007.1 hPa | 0 | 0 |
1719742935 | 26.4 deg C | 80.2 % | 1005.7 hPa | 0 | 0 |
1719742037 | 26.2 deg C | 80.6 % | 1005.9 hPa | 0 | 0 |
1719741136 | 26 deg C | 80.6 % | 1001.2 hPa | 0 | 0 |
1719740240 | 25.8 deg C | 80.1 % | 1006.8 hPa | 0 | 0 |
1719739344 | 25.8 deg C | 79.6 % | 1004.8 hPa | 0 | 0 |
1719738447 | 25.7 deg C | 79.9 % | 1005.5 hPa | 0 | 0 |
*Used Equation Coefficients:
Temp: 0, 0.1, 0
Humi: 0, 0.1, 0
Baro: 0, 0.1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)