This is the latest recevied telemetry packets stored in our database for station/object F5OPV-4. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Tint* | RHint* | Vin* | Vmcu* | Tmcu* |
---|---|---|---|---|---|
1717388805 | 25 C | 50 % | 5 V | 3.3 V | 25 C |
1717388493 | 25 C | 50 % | 5 V | 3.3 V | 25 C |
1717388181 | 25 C | 50 % | 5 V | 3.3 V | 25 C |
1717387874 | 25 C | 50 % | 5 V | 3.3 V | 25 C |
1717387558 | 25 C | 50 % | 5 V | 3.3 V | 25 C |
1717386934 | 25 C | 50 % | 5 V | 3.3 V | 25 C |
1717386622 | 25 C | 50 % | 5 V | 3.3 V | 25 C |
1717386310 | 25 C | 50 % | 5 V | 3.3 V | 25 C |
1717386005 | 25.33 C | 49 % | 5 V | 3.3 V | 25 C |
1717385688 | 25 C | 49 % | 5 V | 3.3 V | 25 C |
1717385375 | 25 C | 49 % | 5 V | 3.3 V | 25 C |
1717385064 | 25.33 C | 49 % | 5 V | 3.3 V | 25 C |
1717384752 | 25.33 C | 49 % | 5 V | 3.3 V | 25 C |
1717384441 | 25.33 C | 49 % | 5 V | 3.3 V | 25 C |
1717384135 | 25 C | 49 % | 5 V | 3.3 V | 25 C |
1717383817 | 25 C | 49 % | 5 V | 3.3 V | 25 C |
1717383506 | 25 C | 49 % | 5 V | 3.3 V | 25 C |
1717383194 | 25 C | 49 % | 5 V | 3.3 V | 25 C |
1717382883 | 25 C | 49 % | 5 V | 3.3 V | 25 C |
1717382571 | 25 C | 49 % | 5 V | 3.3 V | 25 C |
1717382264 | 25 C | 49 % | 5 V | 3.3 V | 25 C |
1717381948 | 25 C | 49 % | 5 V | 3.3 V | 25 C |
1717381636 | 25 C | 50 % | 5 V | 3.3 V | 25 C |
1717381324 | 25.33 C | 49 % | 5 V | 3.3 V | 25 C |
1717381013 | 25.33 C | 49 % | 5 V | 3.3 V | 25 C |
*Used Equation Coefficients:
Tint: 0, 0.3333, -20
RHint: 0, 1, 0
Vin: 0, 0.1, 0
Vmcu: 0, 0.1, 0
Tmcu: 0, 0.1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)