This is the latest recevied telemetry packets stored in our database for station/object UBUTTE. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Value1* | Value2* | Value3* | Value4* | Value5* |
---|---|---|---|---|---|
1720114897 | 0 | 0 | 14.4 | 20.2 | 0.4 |
1720113996 | 0 | 0 | 14.4 | 20.3 | 0.4 |
1720113096 | 0 | 0 | 14.5 | 20.5 | 0.4 |
1720112197 | 0 | 0 | 14.7 | 20.4 | 0.4 |
1720111297 | 0 | 0 | 14.8 | 20.3 | 0.4 |
1720110396 | 0 | 0 | 14.8 | 20.3 | 0.4 |
1720109496 | 0.2 | 0 | 14.7 | 19.8 | 0.4 |
1720108596 | 0.2 | 0 | 14.7 | 19.5 | 0.4 |
1720106796 | 0.2 | 0 | 14.1 | 17.5 | 0.4 |
1720105896 | 0 | 0 | 14 | 18.1 | 0.4 |
1720104999 | 0 | 0 | 13.8 | 17.2 | 0.4 |
1720102296 | 0 | 0 | 13.1 | 14.9 | 0.4 |
1720100498 | 0 | 0 | 12.8 | 15.5 | 0.4 |
1720099598 | 0 | 0 | 12.7 | 15 | 0.4 |
1720098696 | 0 | 0 | 12.7 | 15 | 0.4 |
1720097796 | 0 | 0 | 12.6 | 14.9 | 0.4 |
1720096896 | 0 | 0 | 12.6 | 14.9 | 0.4 |
1720095096 | 0 | 0 | 12.6 | 14.8 | 0.4 |
1720094196 | 0 | 0 | 12.6 | 15.2 | 0.4 |
1720093296 | 0 | 0 | 12.6 | 8.1 | 0.4 |
1720092396 | 0 | 0 | 12.6 | 1 | 0.4 |
1720090596 | 0 | 0 | 12.6 | 0.4 | 0.4 |
1720089696 | 0 | 0 | 12.6 | 0.4 | 0.4 |
1720088796 | 0 | 0 | 12.6 | 0.4 | 0.4 |
1720087896 | 0 | 0 | 12.6 | 0.4 | 0.4 |
*Used Equation Coefficients:
Value1: 0, 1, 0
Value2: 0, 1, 0
Value3: 0, 1, 0
Value4: 0, 1, 0
Value5: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)