This is the latest recevied telemetry packets stored in our database for station/object HS1WDC-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | RxTraffic* | TxTraffic* | RxDrop* | RSSI* | SUN* |
---|---|---|---|---|---|
1720144989 | 9 Pkt | 0 Pkt | 0 Pkt | -35 dBm | 1 % |
1720144062 | 10 Pkt | 0 Pkt | 0 Pkt | -35 dBm | 1 % |
1720143136 | 9 Pkt | 0 Pkt | 0 Pkt | -35 dBm | 1 % |
1720142211 | 29 Pkt | 1 Pkt | 0 Pkt | -35 dBm | 1 % |
1720141285 | 36 Pkt | 0 Pkt | 0 Pkt | -34 dBm | 1 % |
1720140356 | 107 Pkt | 3 Pkt | 0 Pkt | -35 dBm | 1 % |
1720139413 | 35 Pkt | 2 Pkt | 0 Pkt | -35 dBm | 1 % |
1720138484 | 39 Pkt | 0 Pkt | 0 Pkt | -34 dBm | 1 % |
1720137555 | 9 Pkt | 5 Pkt | 2 Pkt | -34 dBm | 1 % |
1720136629 | 10 Pkt | 8 Pkt | 3 Pkt | -34 dBm | 1 % |
1720135703 | 9 Pkt | 1 Pkt | 0 Pkt | -35 dBm | 1 % |
1720134778 | 12 Pkt | 5 Pkt | 2 Pkt | -35 dBm | 1 % |
1720133851 | 9 Pkt | 3 Pkt | 0 Pkt | -35 dBm | 1 % |
1720132924 | 8 Pkt | 0 Pkt | 0 Pkt | -35 dBm | 1 % |
1720131998 | 11 Pkt | 6 Pkt | 1 Pkt | -35 dBm | 1 % |
1720131072 | 10 Pkt | 3 Pkt | 1 Pkt | -34 dBm | 1 % |
1720130147 | 7 Pkt | 3 Pkt | 1 Pkt | -35 dBm | 1 % |
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
RSSI: 0, -1, 0
SUN: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)