This is the latest recevied telemetry packets stored in our database for station/object E27ASY-3. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | RxTraffic* | TxTraffic* | RxDrop* | RSSI* | Voltage* |
---|---|---|---|---|---|
1719770814 | 0 Pkt | 0 Pkt | 0 Pkt | -46 dBm | 0.21 V |
1719769589 | 0 Pkt | 0 Pkt | 0 Pkt | -45 dBm | 0.08 V |
1719768365 | 0 Pkt | 0 Pkt | 0 Pkt | -46 dBm | 0.08 V |
1719767140 | 0 Pkt | 0 Pkt | 0 Pkt | -47 dBm | 0.08 V |
1719765916 | 0 Pkt | 0 Pkt | 0 Pkt | -46 dBm | 0.08 V |
1719764691 | 0 Pkt | 0 Pkt | 0 Pkt | -46 dBm | 0.08 V |
1719763467 | 0 Pkt | 0 Pkt | 0 Pkt | -47 dBm | 0.08 V |
1719762243 | 0 Pkt | 0 Pkt | 0 Pkt | -48 dBm | 0.08 V |
1719761018 | 0 Pkt | 0 Pkt | 0 Pkt | -47 dBm | 0.08 V |
1719759794 | 0 Pkt | 0 Pkt | 0 Pkt | -45 dBm | 0.08 V |
1719758569 | 0 Pkt | 0 Pkt | 0 Pkt | -45 dBm | 0.08 V |
1719757345 | 0 Pkt | 0 Pkt | 0 Pkt | -48 dBm | 0.08 V |
1719756121 | 0 Pkt | 0 Pkt | 0 Pkt | -45 dBm | 0.08 V |
1719754896 | 0 Pkt | 0 Pkt | 0 Pkt | -48 dBm | 0.08 V |
1719753672 | 0 Pkt | 0 Pkt | 0 Pkt | -46 dBm | 0.08 V |
1719752448 | 0 Pkt | 0 Pkt | 0 Pkt | -47 dBm | 0.08 V |
1719751223 | 0 Pkt | 0 Pkt | 0 Pkt | -47 dBm | 0.08 V |
1719749999 | 0 Pkt | 0 Pkt | 0 Pkt | -47 dBm | 0.06 V |
1719748774 | 0 Pkt | 0 Pkt | 0 Pkt | -48 dBm | 0.08 V |
1719747550 | 0 Pkt | 0 Pkt | 0 Pkt | -45 dBm | 0.08 V |
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
RSSI: 0, -1, 0
Voltage: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)