This is the latest recevied telemetry packets stored in our database for station/object TA1NI-10. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | RxTraffic* | TxTraffic* | RxDrop* | RSSI* | Voltage* |
---|---|---|---|---|---|
1719349124 | 28 Pkt | 37 Pkt | 11 Pkt | -60 dBm | 0.04 V |
1719348394 | 44 Pkt | 31 Pkt | 8 Pkt | -62 dBm | 0.04 V |
1719347665 | 32 Pkt | 17 Pkt | 10 Pkt | -61 dBm | 0.04 V |
1719346935 | 26 Pkt | 21 Pkt | 9 Pkt | -60 dBm | 0.04 V |
1719346204 | 36 Pkt | 15 Pkt | 9 Pkt | -59 dBm | 0.04 V |
1719345474 | 41 Pkt | 19 Pkt | 4 Pkt | -64 dBm | 0.04 V |
1719344744 | 41 Pkt | 17 Pkt | 7 Pkt | -59 dBm | 0.04 V |
1719344014 | 37 Pkt | 19 Pkt | 6 Pkt | -65 dBm | 0.04 V |
1719343284 | 43 Pkt | 13 Pkt | 8 Pkt | -60 dBm | 0.04 V |
1719342554 | 47 Pkt | 13 Pkt | 2 Pkt | -58 dBm | 0.04 V |
1719341824 | 47 Pkt | 14 Pkt | 6 Pkt | -59 dBm | 0.04 V |
1719341094 | 3 Pkt | 1 Pkt | 2 Pkt | -61 dBm | 0.04 V |
1719340289 | 45 Pkt | 45 Pkt | 4 Pkt | -59 dBm | 0.02 V |
1719339559 | 30 Pkt | 42 Pkt | 1 Pkt | -62 dBm | 0.04 V |
1719338829 | 36 Pkt | 47 Pkt | 11 Pkt | -62 dBm | 0.04 V |
1719338099 | 38 Pkt | 42 Pkt | 10 Pkt | -62 dBm | 0.04 V |
1719337369 | 41 Pkt | 43 Pkt | 10 Pkt | -63 dBm | 0.04 V |
*Used Equation Coefficients:
RxTraffic: 0, 1, 0
TxTraffic: 0, 1, 0
RxDrop: 0, 1, 0
RSSI: 0, -1, 0
Voltage: 0, 1, 0
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)