This is the latest recevied telemetry packets stored in our database for station/object YO3FVR-1. If no packets are shown the sender has not sent any telemetry packets the latest 1 day(s).
Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
Time | Vin* | Vsol* | Isol* | Eff1h* | Tin* |
---|---|---|---|---|---|
1720333382 | 12.6 Volt | 0 Volt | 0 Amp | 50 Pcnt | 21.5 C |
1720332782 | 12.6 Volt | 0 Volt | 0 Amp | 42 Pcnt | 21.5 C |
1720332182 | 12.6 Volt | 0 Volt | 0 Amp | 27 Pcnt | 21.5 C |
1720331582 | 12.6 Volt | 0 Volt | 0 Amp | 36 Pcnt | 21.5 C |
1720330982 | 12.6 Volt | 0 Volt | 0 Amp | 41 Pcnt | 21.5 C |
1720330382 | 12.6 Volt | 0 Volt | 0 Amp | 43 Pcnt | 21 C |
1720329782 | 12.6 Volt | 0 Volt | 0 Amp | 40 Pcnt | 21 C |
1720329182 | 12.6 Volt | 0 Volt | 0 Amp | 40 Pcnt | 21 C |
1720328582 | 12.6 Volt | 0 Volt | 0 Amp | 47 Pcnt | 21 C |
1720327982 | 12.6 Volt | 0 Volt | 0 Amp | 38 Pcnt | 21 C |
1720327382 | 12.6 Volt | 0 Volt | 0 Amp | 31 Pcnt | 21 C |
1720326782 | 12.6 Volt | 0 Volt | 0 Amp | 29 Pcnt | 21 C |
1720326182 | 12.6 Volt | 0 Volt | 0 Amp | 45 Pcnt | 21 C |
1720325582 | 12.6 Volt | 0 Volt | 0 Amp | 40 Pcnt | 21 C |
1720324982 | 12.6 Volt | 0 Volt | 0 Amp | 36 Pcnt | 21 C |
1720324382 | 12.6 Volt | 0 Volt | 0 Amp | 43 Pcnt | 21 C |
1720323782 | 12.6 Volt | 0 Volt | 0 Amp | 45 Pcnt | 21 C |
1720323182 | 12.6 Volt | 0 Volt | 0 Amp | 48 Pcnt | 21 C |
1720322582 | 12.6 Volt | 0 Volt | 0 Amp | 42 Pcnt | 21 C |
*Used Equation Coefficients:
Vin: 0, 0.075, 0
Vsol: 0, 0.075, 0
Isol: 0, 0.1, 0
Eff1h: 0, 1, 0
Tin: 0, 0.5, -64
- The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
- Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
The sent equation coefficients is used in the equation: a * value2 + b * value + c. - The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
- The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
- All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
- A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)